supply of water quality testing goods / equipment-1 a ) gas chromatograph mass spectrometer ( gcms ) * and rotary evaporator 2 installation and demonstration of full operation of the equipment free of cost. 3 furnishing of detailed operations and maintenance manual for each appropriate unit of supplied goods free of cost. 4 comprehensive annual maintenance charges ( camc ) after completion of five-year standard warranty period: 5 1st year camc price 6 2nd year camc price 7 3rd year camc price 8 training for 2-3 persons for a week ( twice ) within a gap of six months for operation and maintenance at installation site free of cost. 9 training for 5-10 persons for 2-3 days in respective organization for operation and maintenance etc ( 2 nos during warranty period and 1 no during amc period ) 10 supply of consumables along with instrument at the time of delivery: 11 a )        filament, high temperature ei for gcms 12 b )       septa non-stick bto inlet 11mm 100 pk 13 c )        septa non-stick bto inlet 11mm 50 pk 14 d )       graphite o-ring for splitless, 10 / pk 15 e )        liner, ui, split, straight, glass wool, 5 / pk 16 f )         liner, ui, splitless, single taper, gw, 5 / pk 17 g )       ferrule, 0.5mm vg 0.32 col 10 / pk 18 h )       ferrule, 0.4mm vespel 0.1-0.25 col 10 / pk 19 i )         ferrule, 0.5mm vespel 0.32 col 10 / pk 20 j )         column nut, inlet / detect 21 k )       glass wool, silane-treated, 50 grams 22 l )         auto sampler clear vials with cap and septa ( 100 nos. ) 23 m )     column: db-5ms 30m, 0.25mm, 0.25um 24 n )       column: cp-wax 51 for amines 25mx 0.25mm x 0.2um 25 o )       column: db-5 30m, 0.25mm, 0.25u 26 p )       column: db-1ms ultra inert 30m, 0.25mm, 0.25um 27 q )       syringe, 5.0 ul fn 26 g bevel tip 28 r )         auto sampler syringe 29 s )        syringe, 10ul ptfe tip, fn 23-26 / 42 / hp 30 t )         electron multiplier horn, high gain 31 u )       pftba sample, 10 g 32 v )       heater / sensor assembly 33 w )      split vent trap pm kit, single cartridge 34 b ) induced coupled plasma mass spectrometer ( icp-ms ) ans microwave digestion system 35 installation and demonstration of full operation of the equipment free of cost. 36 furnishing of detailed operations and maintenance manual for each appropriate unit of supplied goods free of cost. 37 comprehensive annual maintenance charges ( camc ) after completion of five-year standard warranty period: 38 1st year camc price 39 2nd year camc price 40 3rd year camc price 41 training for 2-3 persons for a week ( twice ) within a gap of six months for operation and maintenance at installation site free of cost. 42 training for 5-10 persons for 2-3 days in respective organization for operation and maintenance etc ( 2 nos during warranty period and 1 no during amc period ) 43 supply of consumables along with instrument at the time of delivery: 44 a )       ion lenses or equivalent 45 b )      plasma torch 46 c )        rf coil or equivalent accessory 47 d )       injector quartz torch 48 e )       spray chamber 49 f )        skimmer cone ( ni and pt ) 50 g )       sampler cone ( ni and pt ) 51 h )       tubing for sample introduction, drain and internal standard 52 i )        nebulizer 53 j )         hyper-skimmer cone / extraction system for high matrix and higher sensitivity / ion lenses 54 k ) rotary pump oil packets should be provided for complete warranty period of operation. 55 l ) chiller coolant should be provided for complete warranty period of operation. 56 m ) screw / nut / spaces / o ring for icp-ms 57 n )      shield torch 58 the following additional spares should be supplied along with the system: ( a ) torch kits- 2 nos; ( b ) alumina injector- 2 nos ( c ) quartz injector – 1 nos ( d ) sapphire injectors- 1 nos ( e ) spare nebulizer / spray chamber – 2nos; ( f ) sample introduction kit. 1-nos ( g ) auto sampler tubings – 24 nos . inclusive of all parts. vendor should supply suitable chiller re-circulator of appropriate capacity along with the system with warranty of minimum 5 years. air compressor and purification panels for argon and nitrogen should be included. the vendor should take care of the installation of ducting from the gas cylinders to the instrument. hydride generator kit should be included for hydride forming elements like as, hg,