inviting expression of interests (eois) for empanelment of suppliers for supply of handlooms/handloom accessories etc. supply of handlooms/handloom accessories etc. to the weavers under hathkargha samvardhan sahayata (hss) in the districts varanasi, chandauli, mau, azamgarh, gorakhpur, barabanki, sitapur, hardoi and kanpur of uttar pradesh under nhdp , handlooms: , frame loom 56” banarasi poles: size-3.5” x 4” (seasoned wood) pole height – 6 feet cloth beam- 4” diameter, (shakhu wood) warp beam- 4” diameter, (shakhu wood) sley(for 54” banarasi loom made of shakhu wood) jacquard mounting frame-1 no. 5 wheel take-up motion – 1 set treadles(set of 4 pcs) – 1 set tighteneror phalli (set of 2 pcs) – 1 set heald frame along with gulla- set of 4 frames (suitable for 54” handloom for banarasi silk weaving) – 1 set note: entire loom made from “chid wood” and shuttle boxes of sisham wood is also acceptable. , frame loom 56” suitable for dury/stole weaving poles: size-3.5” x 4” (seasoned wood) pole height – 5.75 feet cloth beam- 4” diameter, (shakhu wood) warp beam- 4” diameter, (shakhu wood) sley (for 54” dury handloom made from shakhu wood) 5 wheel take-up motion – 1 set treadles(set of 4 pcs) – 1 set tighteneror phalli (set of 2 pcs) – 1 set heald frame with wire healds- set of 4 frames (with 2000 wire healds, suitable for duri weaving on 56” handloom) – 1 set note: entire loom made from “chid wood” and shuttle boxes of sisham wood is also acceptable. , frame loom 72” suitable for dury/stole weaving poles: size-4” x 4” (seasoned wood) pole height – 5.75 feet cloth beam- 4” diameter, (shakhu wood) warp beam- 4” diameter, (shakhu wood) sley (for 60” dury handloom made from shakhu wood) 5 wheel take-up motion – 1 set treadles(set of 4 pcs) – 1 set tighteneror phalli (set of 2 pcs) – 1 set heald frame with wire healds- set of 4 frames (with 2000 wire healds, suitable for duri weaving on 72” handloom) – 1 set note: entire loom made from “chid wood” and shuttle boxes of sisham wood is also acceptable. , frame loom 102” suitable for fabric/bedsheet weaving poles: size-4” x 4” (seasoned wood), pole height – 5.75 feet cloth beam- 4” diameter, (shakhu wood), warp beam- 4” diameter, (shakhu wood), sley (for 90” fabric/bedsheet handloom made of shakhu wood), 5 wheel take-up motion – 1 set, treadles(set of 4 pcs) – 1 set, tighteneror phalli (set of 2 pcs) – 1 set, heald frame with wire healds- set of 4 frames (with 3000 wire healds, suitable for fabric/bedsheet weaving on 102” h/l) – 1 set note: entire loom made from “chid wood” and shuttle boxes of sisham wood is also acceptable. , front pole for slay mounting-2 pieces, 4’’x4’’x5 feet front pole- 2pieces, 4’’ x4’’x 4 feet back pole -2 pieces, 4’’ x4’’x 2.5 feet warp beam diameter-4’’ -1piece. cloth beam diameter-4’’ -1piece. 5 wheel take-up motion- 1 set jacquard mounting frame-1 no. slay- 1 piece, heald shafts set of 4 healds with gulla & fani- 1 set treadle- set of 4 treadles-1 set neck cord- 1 ball, jala- 1 kg, naka—1/2 kg & pagia- ½ kg. note- rate to be quoted including pit digging and installation of pitloom. , front pole for slay mounting-2 pieces, 4’’x4’’x5 feet front pole- 2pieces, 4’’ x4’’x 4 feet back pole -2 pieces, 4’’ x4’’x 2.5 feet warp beam diameter-4’’ -1piece. cloth beam diameter-4’’ -1piece. 5 wheel take-up motion- 1 set, jacquard mounting frame-1 no. 2 shedding rollers (biarol)- 1 set heald shafts set of 4 healds & fani- 1 set, treadle- set of 4 treadles- 1 set, slay -1 piece, neck cord- 1 ball, jala- 1kg, tana garari- 12set, comber board- 1 set, mail eye-, hirness & lingoe of 10gm- 5200 set. note- rate to be quoted including pit digging and installation of pitloom. , front pole for slay mounting-2 pieces, 4’’x4’’x5 feet front pole- 2pieces, 4’’ x4’’x 4 feet back pole -2 pieces, 4’’ x4’’x 2.5 feet warp beam diameter-4’’ -1piece. cloth beam diameter-4’’ -1piece. 5 wheel take-up motion- 1 set slay- 1 piece, heald shafts set of 4 healds &fani - 1 set treadle- set of 4 treadles-1 set note- rate to be quoted including pit digging and installation of pitloom. , front pole for slay mounting-2 pieces, 4’’x4’’x5 feet front pole- 2pieces, 4’’ x4’’x 4 feet back pole -2 pieces, 4’’ x4’’x 2.5 feet warp beam diameter-4’’ -1piece. cloth beam diameter-4’’ -1piece. 5 wheel take-up motion- 1 set slay- 1 piece, heald shafts set of 4 healds &fani - 1 set treadle- set of 4 treadles-1 set note- rate to be quoted including pit digging and installationof pitloom. , handloom jacquards, dobbey & warping machines , 100 chowk jacquard made with shisham wood suitable for banarasi handloom along with set of following items:- connecting lever – 1 no., card stand- 1 no. punching plate – 1 set harness ball – 10 no. neck cord (nylon) – 200.00 gm pagia (nylon) – 1.00 kg naka (nylon) – 500.00 gm along with installation & commissioning of jacquard & harnessing (jala, pagia tyeing) , 80 chowk jacquard made with shisham wood suitable for banarasi handloom along with set of following items:- connecting lever – 1 no., card stand- 1 no. punching plate – 1 set harness ball – 10 no. neck cord (nylon) – 200.00 gm pagia (nylon) – 1.00 kg naka (nylon) – 500.00 gm along with installation & commissioning of jacquard & harnessing (jala, pagia tyeing) , 60 chowk jacquard made with shisham wood suitable for banarasi handloom along with set of following items:- connecting lever – 1 no., card stand- 1 no. punching plate – 1 set harness ball – 10 no. neck cord (nylon) – 200.00 gm pagia (nylon) – 1.00 kg naka (nylon) – 500.00 gm along with installation & commissioning of jacquard & harnessing (jala, pagia tyeing) , 50 chowk jacquard made with shisham wood suitable for banarasi handloom along with set of following items:- connecting lever – 1 no., card stand- 1 no. punching plate – 1 set harness ball – 10 no. neck cord (nylon) – 200.00 gm pagia (nylon) – 1.00 kg naka (nylon) – 500.00 gm along with installation & commissioning of jacquard & harnessing (jala, pagia tyeing) , 40 chowk jacquard made with shisham wood suitable for banarasi handloom along with set of following items:- connecting lever – 1 no., card stand- 1 no. punching plate – 1 set harness ball – 10 no. neck cord (nylon) – 200.00 gm pagia (nylon) – 1.00 kg naka (nylon) – 500.00 gm along with installation & commissioning of jacquard & harnessing (jala, pagia tyeing) , 30 chowk jacquard made with shisham wood suitable for banarasi handloom along with set of following items:- connecting lever – 1 no., card stand- 1 no. punching plate – 1 set harness ball – 10 no. neck cord (nylon) – 200.00 gm pagia (nylon) – 1.00 kg naka (nylon) – 500.00 gm along with installation & commissioning of jacquard & harnessing (jala, pagia tyeing) , 480 hook electronic jacquard with single phase self driving mechanism-1, power including motor= 600 watt.-1, control panel with usb pen drive support-1, jacquard guide board-1, jacquard harness connector/ linker -480, upper gulla/ shafts driving lever with support plate – 4, bottom gulla/ shafts driving lever with support plate- 8, double loop naka with dead weight/ suwa12gm- 2400, comber board with aluminium frame-1, 3ply nylon gulla/ shaft with steel flat pipe- 6 along with installation & commissioning of jacquard & harnessing (jala, pagia tying) , 640 hook electronic jacquard with single phase self driving mechanism. power including motor= 700 watt. control panel with usb pen drive support-1, jacquard guide board-1, jacquard harness connector/ linker -640, upper gulla/ shafts driving lever with support plate – 4, bottom gulla/ shafts driving lever with support plate- 8, double loop naka with dead weight/ suwa12gm- 2400, comber board with aluminium frame-1, 3ply nylon gulla/ shaft with steel flat pipe- 6 along with installation & commissioning of jacquard & harnessing (jala, pagia tying) , 800 hook electronic jacquard with single phase self driving mechanism. power including motor= 750 watt. control panel with usb pen drive support-1, jacquard guide board-1, jacquard harness connector/ linker -800, upper gulla/ shafts driving lever with support plate – 4, bottom gulla/ shafts driving lever with support plate- 8, double loop naka with dead weight/ suwa12gm- 2400, comber board with aluminium frame-1, 3ply nylon gulla/ shaft with steel flat pipe- 6 along with installation & commissioning of jacquard & harnessing (jala, pagia tyeing) , 960 hook electronic jacquard with single phase self driving mechanism. power including motor=750watt. control panel with usb pen drive support-1, jacquard guide board-1, jacquard harness connector/ linker -960, upper gulla/ shafts driving lever with support plate – 4, bottom gulla/ shafts driving lever with support plate- 8, double loop naka with dead weight/ suwa12gm- 2400, comber board with aluminium frame-1, 3ply nylon gulla/ shaft with steel flat pipe- 6 along with installation & commissioning of jacquard & harnessing (jala, pagia tying) , horizontal drum warping machine 72” for use of handloom warping made of shakhu wood drum circumference – 5 yards length – 72”, width – 8 feet creel capacity – 200 bobbins with warping heck & brake system arrangement installation & commissioning included , for use of handloom warping made of shakhu wood drum circumference – 5 yards length – 90”, width – 8 feet creel capacity – 200 bobbins with warping heck & brake system arrangement installation & commissioning included , for use of handloom warping (made from sakhu wood) circumference 4 yards, pole size- 4”x4”x6.5 feet, heck – 1 feet x 1 feet – 2 pieces creel capacity – 100 bobbins installation & commissioning included , handloom accessories , with good quality single phase isi motor ac ¼ hp 1440 rpm , good quality isi wires, isi switches, good quality parts, high weight lifting capacity along with successful installation & commissioning on loom , suitable for weaving of kaduwa buti on handloom please quote rate per buti. with successful demo on loom , reed – 96s x 50” , reed – 100s x 50” , reed – 104s x 50” , reed – 112s x 50” , reed – 116s x 50” , reed – 120s x 50” , reed - 24s x 50” , reed - 24s x 72” , reed - 24s x 102” , reed – 20s x50’’ , reed – 20s x72’’ , reed – 20s x102’’ , reed - 18s x50’’ , reed - 18s x72’’ , reed -18s x102’’ , reed - 16s x50’’ , reed - 16s x72’’ , reed - 16s x102’’ , reed – 14s x50’’ , reed – 14s x72’’ , reed – 14s x102’’ , reed – 12s x50’’ , reed –12s x 72’’ , reed –12s x 102’’ , reed – 10s x50’’ , reed – 10s x72’’ , reed – 10s x102’’ , reed - 48s x50’’ , reed - 48s x72’’ , reed - 48s x102’’ , reed - 44s x50’’ , reed - 44s x72’’ , reed - 44s x102’’ , reed – 40s x50’’ , reed – 40s x72’’ , reed – 40s x102’’ , reed - 36s x50’’ , reed - 36s x72’’ , reed - 36s x102’’ , reed – 32s x50’’ , reed – 32s x72’’ , reed – 32s x102’’ , reed – 28s x50’’ , reed – 28s x72’’ , reed – 28s x102’’ , nylon heald 96s(complete set of baser & gulla)- set of 4 pcs , nylon heald 104s(complete set of baser & gulla) , nylon heald 108s(complete set of baser & gulla) , nylon heald 112s(complete set of baser & gulla) , nylon heald 116s(complete set of baser & gulla) , nylon heald 120s(complete set of baser & gulla) , nylon heald 96(complete set of baser & gulla)- set of 5 pcs , wire heald (13”) - set of 1000 nos , wire heald (11”) - set of 1000 nos , horn shuttle – 10”, , wooden shuttle (nav vali) – setof 4 pcs, suitable for duri weaving , sley – 60” (sakhu wood),suitable for duri weaving , elastic cord –packet of500 gm , heald hook – set of 2 pcs , lease rod – set of 4 pcs , bindhani – set of 3 pcs , baiser – set of 10 pcs , nari– set of 50 pcs , sirki – set of 100 pcs , cotton string (thin) packet of 500 gm , punching card sheet- cards 44 oz for punching cars for jacquard / dobby , comber board for 56” loom-frame made of shakhu/shiaham wood with fiber / wire mesh , comber board for 60” loom- frame made of shakhu/shiaham wood with fiber / wire mesh , for use on harnessing on handloom made of iron, weight – upto 8 gm, (rate per 1000) , for jacquard/dobby card cutting made from sakhu wood, size- 36”x24” , mat form (rate in kg) , ball form (rate per piece ball) , for harnessing per 1000 , for lifting of heald frames 2.5” dia x 2 feet (set of 2 pcs) , for lifting of heald frames(set of 8 pcs) , cotton string (thick) packet of 1.00 kg , cycle charkha , set of 5 wheel take-up motion , wooden treadles– set of 4 nos,2” x 2” x length 1.00 meter, suitable for duri loom , 4” diameter for 60” width duri handloom , 4” diameter for 60” width duri handloom , 4” diameter for 54” width duri handloom , 4” diameter for 54” width duri handloom , wooden heald frame complete with varnish or steel wire healds set of 4 nos.,suitable for 60” duri handloom and use of 13” wire heald , wooden lam rod – set of 4 nos-suitable for 60” duri handloom , wooden pirn 6” – set of 100 nos -suitable for use in naav shuttle for duri weaving , bobbin – set of 50 pcs , with installation & commissioning solar home light with solar pannel – 60 watt – 1 no. battery 40ah tubelar – 1 no., charge controller– 1 no., led light – 5 watt – 2 nos. ceiling fan 25 watt– 1 no.