supply, fitting and installation of solar high mast system at bhare, tq. mulshi, dist. pune , supply, providing and installation of 9 mtr. pole solar high mast system: a ) solar led luminaries / flood light wattage should be of 50 watt -- 6 nos.b ) ledshould be of / powered by philips / osaram or equivalent reputed brand. c ) battery should be of lithium ion / li sepo4 ( lithium ferro phosphate ) d ) battery capacity should be atleast 100 ah--- 6 nos. e ) solar panel should be of 330 watt--- 6 nos. f ) pole should be polygonal. the mast should be hot dip galvanized 20 sided polygonal structre having bottom a / f minimum dia 330 mm and top a / f dia 150 mm of 3 mm thikness. two wire ropes should be provided having dia minimum 6 mm and breking load capacity min. 2000 kg x 2. manual pulley system should be provided for raising and lowering lighting mast. g ) bracket and light elbow should be of sufficient strengthh ) there shoud be foundation bolt in each systemi ) civil foundation work and fixing offoundation / j bolt should be proper , supply, providing and installation of 7 mtr pole solar high mast system:a ) solar led luminaries / flood light wattage should be of 30 / 40 watt -- 4 nos.b ) ledshould be of / powered by philips / osaram or equivalent reputed brandc ) battery should be of lithium ion and should be inbuilt in led luminariesd ) battery capacity should be atleast 30 ah--- 4 nos.e ) solar panel should be of 75 watt and voltage should be 12 v --- 4 nos. f ) pole should be octagonal gi coated / hot dip galvanized and thickness should not be less than 2.8 mm and should be of length 6 metre and should have sufficient strength to withstand load of panel, led & batteries. g ) bracket and light elbow should be of sufficient strengthh ) there shoud be 4 nos. foundation bolt in each systemi ) civil foundation work and fixing of 4 nos foundation / j bolt should be proper