supply of various type of test kits and consumables for biochemistry dept supply of various type of test kits and consumables for biochemistry dept , serum sugar ( liquid stable, ready to use, linearity =700mg / dl, kinetic ) , serum urea- ( liquid, ready to use, kinetic, linearity =300 mg / dl , serum creatinine- ( liquid, ready to use, kinetic, linearity = 22 mg / dl ) , serum total protein- ( liquid, ready to use, end point linearity =15g / dl ) , serum albumin- ( liquid, ready to use, end point, linearity = 7g / dl ) , serum total cholesterol- ( liquid stable, ready to use, end point, linearity =1000mg / dl ) , serum triglyceride- ( liquid, ready to use, end point, linearity =1000mg / dl ) , serum calcium- ( liquid stable ready to use, end point, linearity above 15 mg / dl , serum phosphorus- ( liquid, ready to use, linearity =15 mg / dl ) , serum uric acid- ( liquid, stable ready to use, end point, linearity = 20mg / dl ) , serum ggt- ( liquid, stable ready to use, linearity =500 u / l ) , serum creatine phosphakinase ( ck-nac / cpk ) - ( liquid, stable ready to use, linearity =1500u / l ) , serum acid phosphatase- ( liquid stable ready to use, kinetic, linearity =75 iu / l - for fully auto ( supply with calibrator ) / semiauto analyzer ( supply with standard ) , serum ck-mb kit with calibrator & control- ( liquid stable or lyophilised reagent reconstitution satbility 30 days at 2-80c immunoinhibition uv kinetic method, linearity =1000 u / l with lyophilised calibrator & control having reconstitution satbility =7 days at 2-80c ) , total & direct billirubin ( liquid stable, ready to use, fixed time, linearity ?20 mg / dl ) , sgot- ( kinetic, linearity above 300 unit / lt., ifcc method, liquid stable reagent ) , sgpt- ( kinetic, linearity above 300 unit / lt., ifcc method, liquid stable reagent ) , alkaline phosphatase- ( kinetic, linearity above 1200 u / l, ifcc method ) , serum ldh ( liquid stable, ready to use, kinetic, linearity =1200 u / l ) , amylase ( liquid stable, linearity above 1500 u / l, kinetic ) , lipase ( liquid stable, ready to use, kinetic, linearity =300 u / l ) , csf microprotein ( liquid stable, ready to use, linearity upto400 mg / dl ) , magnesium ( liquid stable, ready to use, end point ) , hdl-cholesterol ( direct clearance method, linearity >180 mg / dl. with calibrator & control , multi calibrator for fully auto analyzer ** ( for calibration of above biochemical parameters. calibrator should be traceable to internationally accepted norms.calibrator will run as per requirement time to time. , multi control for fully auto analyzer ** ( control of high, normal / low will run daily ) for above biochemical parameters. should be traceable to internationally accepted norms. , serum urea- ( liquid, ready to use, with standards, linearity =500 mg / dl ( berthlot method ) end point.standard for quality check should be include in kit. , serum sugar ( liquid stable, ready to use, end point with low & high standard, linearity =500mg / dl, glucose-oxidase method ) , serum creatinine- ( liquid, ready to use, with standard, linearity = 18 mg / dl, modified jaffe method, end point / kinetic method. standard for quality check should be include in kit. , total & direct billirubin ( liquid stable, ready to use, linearity above 10 mg / dl, preferably single reagent ( diazo with sulphanilic acid ) , sgot- ( kinetic, linearity above 300 unit / lt., ifcc method, liquid stable reagent ) . standard for quality check. , sgpt- ( kinetic, linearity above 300 unit / lt., ifcc method, liquid stable reagent ) . standard for quality check. , alkaline phosphatase- ( kinetic, linearity above 1200 u / l, ifcc or aacc optimized method. standard for quality check should be include in kit. ) , hitachi sample cup, ( polystyrene, highly transparent, non-sticky, 17mm x 38mm or 2ml ) , disposable test tube ( 12 x 75mm with rim, 5ml capacity, bottom round, autoclavable and thermal resistant, highly transparent , white paper laboratory tissue roll ( for cleaning of equipments, pattern plane and should be thick and not leave the rashes or fibers on cleaning surfaces ) , ec-ph meter combo set ( portable, lcd display, quick measurements, accurate reading for tds, ph, electrical conductivity and temperature of water, also supply with 2xcalibration powders, and carry box ) , sodium hypochlorite solution ( 5-10% ) , disposable assay tip on rack ( tip size 0-200 ?l ) - should be universal, should have minimize liquid retention, highly transparent, made of non-sticky material and also must be graduated marking at various levels at 50, 100, 150 & 200. , disposable assay tip on rack ( tip size 100-1000 ?l ) - should be universal, should have minimize liquid retention, highly transparent, made of non-sticky material and also must be graduated marking at 100, 250, 500, 750 &1000?l. , tray with divided 2-4 compartments- ( perfect for hold and transport of racks with samples ) , marker pen fine tip ( red / black, usable on glassware ) , antiseptic soap for hand wash ( liquid ) , hand sanitizer ( liquid ) , concentration of contents according to who guideline. , quick maintenance spray- rust removal spray ( suitable for cleans, protects, lubricates displaces moisture cfc free formula based ) , sample transport box with carry handle, • to transport 13x75 blood collection tubes for sturdiness from home collection to lab or hospital . comes with inbuilt temperature indicator. • polycarbonate construction and available in three colors for user / owner identification • silicone water-tight seal and three lid clasps provide secure closure • lid opens a full 180°, allowing total access to contents and making it easier to clean • will accommodate 13 and 16 mm tubes in a minimum 72-place onerack, or similar sized • use the separators provided to create your own compartment sizes, or use empty to transport larger products and equipment • autoclavable , blood sample collection tube size7 ml capacity - 1. additive :- serum separating gel ( ssg ) and clot activator. ( gel present at bottom of tube and should be stable in physio-chemical variation and avoid high temperature decomposition or molecules precipitation ) . 2. color coding of cap :- red in colour ( screw cap preferred ) , non-vacutable tube 3. should be sterile, with safety closure and single hand operation for capping and decapping. 4. should have fill mark to indicate the draw volume. 5. ce / fda certified. 6. toxicity certificate and batch wise sterility / pyrogenicity certificate should be provided. 7. the tube should contain a label for noting the patient’s details. 8. expiry date should be printed on the tube. shelf life should be minimum 12 months or more from the date of manufacturing.