tender for carriage of transformer work-1 carriage of fallowings from esc. bsr to pit site on kachcha pacaa road including loading and unloading chagres at both ends, rcquricd for proper completion of work, distance about to 60 kms. 2 s.t pole 11 mtr. long 3 pcc pole 8.5 mtr long. 4 carriage of all line material from store center bsr to j.e store sub station as acsr weasel conductor, abc conductor gi wire, earth wire. m.s. chanel, angle, stay & earthig rods, barbed wire. disc insulator etc. 5 erection of single pole support including complete 1 it fittings as per respo manual and as per direction of engineer in charge including the cost of labour, t&p and carrier etc. required for proper completion of work. 6 erection of double pole / scation pole support including complete 1 it fittings as per respo manual and as per direction of engineer in charge including the cost of labour, t&p and carrier etc. required for proper completion of work. 7 grouting of single support shall be grouted with cement, sand and birck ballast / stone ballast in ratio 1:4:8 =30x3030 cms. including the cost of cement, sand, birck ballast / stone ballast, etc. as per actual size requirement, as per respo manual and as per direction of engineer in charge including the cost of labour, t&p and carrier etc. required for proper completion of work. 8 grouting of double pole support shall be grouted with cement, sand and birck ballast / stone ballast in ratio 1:4:8 =30x3030 cms. including the cost of cement, sand, birck ballast / stone ballast, etc. as per actual size requirement, as per respo manual and as per direction of engineer in charge including the cost of labour, t&p and carrier etc. required for proper completion of work. 9 carriage of all line material from j.e store sub station to pit site acsr weasel conductor, abc conductor gi wire, earth wire. m.s. chanel, angle, stay & earthig rods, barbed wire. disc insulator etc. 10 cutting / drilling / welding of ms angle iron for making guarding angle size 65x65x6 / 50x50x6 mm including the work of fixing the bracket on pcc / st pole for construction of the line. 11 carriage of 11 kv ct / pt metering polemounted unit varius ratio 12 carriage and installation of 11 kv pilferresistant metering cubicle with out cable termination kit 13 mounting of 11 kv ct / pt unit varius ratio 14 erection of d.o fuse set with clamp 15 making / filling of 11 kv cable jointing kit varius size xlpe cable 16 carriage of t / f from esc. bsr to pit site on kachcha pacaa road including loading and unloading chagres at both ends, rcquricd for proper completion of work, distance about to 60 kms. 17 25 kva t / f 18 63 kva t / f 19 fixing of 11 kv stay rod with stay wire in proper way with nozelling 20 grouting of 11 kv stay rods 21 laying, sagging. stringing and binding and jumpering of 11 kv xlpe cable 3*70 square mm & outher size newly erected pole as per respo manual and as per direction of supervising engineer. it includes the cost of labour, t&p, carrier etc. requried for proper completion of work. 22 laying, sagging. stringing and binding and jumpering of acsr weisal , rabbit, dog newly erected pole as per respo manual and as per direction of supervising engineer. it includes the cost of labour, t&p, carrier etc. requried for proper completion of work. 23 acsr weisal conductor 24 acsr dog conductor 25 acsr rabbit conductor 26 fixing of earthing rod 27 fixing of pin insulator and pin with nut 28 fixing disc insulator and disc feeting 29 25 kva t / f 30 63 kva t / f 31 installation of 11 kv tvm 3p4w 32 the folloing material is required to be supplied by the contractor. 33 holding clamp 34 11kv cable jointing kit 3*70 square mm xlpe cable 35 pcc pole clamp 36 f clamp 37 stone pad 300x300x75 38 barbed wire 39 danger board with nut and clamp 40 lt socket insulator 41 concrete pole and stay 42 clamp with nut and bolt 43 red oxide paint 44 aluminium paint 45 bolt & nut off size.