supply and fixing of open garden gym items in cantonment area . as per tender documents . - 1 seated chest press : providing, designing and fixing of seated chest press in a pair of size 1800 x 700 x 2000 mm as per image- 01 in dnit ( + or - variation in size 10% allowed to accommodate larger number of manufacturers ) fabricated with main post of 114 mm dia and 3.0 mm thick and other pipes of 40 mm dia 2.5 mm thick made up of hot rolled tubular steel and hot dipped galvanized and powder coated 50-120 micron thick using akzo nobel or equivalent in desired shade and colour. all welding joints of pipe shall be robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. zinc primer paint to be applied at all the welding points prior to finishing. all open ends of pipe to be closed with gi / lldpe caps, base plate cover shall be made of vergin lldpe plastic by rotational molded with minimum 4 mm thickness uv resistant and environment friendly and colour as approved by engineer in charge. high quality grip rubber should be used on handles. foothold shall be made of nylon alloywith rounded edges to prevent impact and injury . bearing used shall be maintenance free in the equipments manufactured by reputed company duly oil sealed and self lubricated to be approved by engineer in charge . the equipment shall be fitted with in-built limiters to prevent unwanted movement. the equipment shall be fixed on ground with concrete of minimum strength m-25 and j shaaped welded bolts and when concrete is set, fixing the equipment on to it and cover nuts and bolts with base place cover, all complete as per directions and approval of engineer-in-charge regarding material, shape of equipment, colour ( of metal, seat and pedal ) , and fixing of equipment etc including the cost of cement concrete and excavation work complete of commissioning of equipment. n 2 pull chair : providing, designing and fixing of pull chair in pair of size 2500 x 800 x 2000 mm as per image- 02 in dnit ( + or - veriation in size 10% allowed to accommodate larger number of manufacturers ) fabricated with main post of 114 mm dia and 3.0 mm thick and other pipes of 40 mm dia 2.5 mm thick made up of hot rolled tubular steel and hot dipped galvanized and powder coated 80-120 micron thick using akzo nobel or equivalent in desired shade and colour. all welding joints of pipe shall be robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. zinc primer paint to be applied at all the welding points prior to finishing. all open ends of pipe to be closed with gi / lldpe caps, base plate cover shall be made of vergin lldpe plastic by rotational molded with minimum 4 mm thickness uv resistant and environment friendly and colour as approved by engineer in charge. high quality grip rubber should be used on handles. foothold shall be made of nylon alloywith rounded edges to prevent impact and injury . bearing used shall be maintenance free in the equipments manufactured by reputed company duly oil sealed and self lubricated to be approved by engineer in charge . the equipment shall be fitted with in-built limiters to prevent unwanted movement. the equipment shall be fixed on ground with concrete of minimum strength m-25 and j shaaped welded bolts and when concrete is set, fixing the equipment on to it and cover nuts and bolts with base place cover, all complete as per directions and approval of engineer-in-charge regarding material, shape of equipment, colour ( of metal, seat and pedal ) , and fixing of equipment etc including the cost of cement concrete and excavation work complete of commissioning of equipment. 3 air swing: providing, designing and fixing of air swing in pair of size 1150 x 900 x 1250 mm as per image- 03 in dnit ( + or — veriation in size 10 % allowed to accommodate larger number of manufacturers ) fabricated with main post of 114 mm dia and 3.0 mm thick and other pipes of 40 mm dia 2.5 mm thick made up of hot rolled tubular steel and hot dipped galvanized and powder coated 80-120 micron thick using akzo nobel or equivalent in desired shade and colour. all welding joints of pipe shall be robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. zinc primer paint to be applied at all the welding points prior to finishing. all open ends of pipe to be closed with gi / lldpe caps, base plate cover shall be made of vergin lldpe plastic by rotational molded with minimum 4 mm thickness uv resistant and environment friendly and colour as approved by engineer in charge. high quality grip rubber should be used on handles. foothold shall be made of nylon alloywith reounded edges to prevent impact and injury . bearing used shall be maintenance free in the equipments manufactured by reputed company duly oil sealed and self lubricated to be approved by engineer in charge . the equipment shall be fitted with in-built limiters to prevent unwanted movement. the equipment shall be fixed on ground with concrete of minimum strength m-25 and j shaaped welded bolts and when concrete is set, fixing the equipment on to it and cover nuts and bolts with base place cover, all complete as per directions and approval of engineer-in- charge regarding material, shape of equipment, colour ( of metal, seat and pedal ) , and fixing of equipment etc including the cost of cement concrete and excavation work complete of commissioning of equipment. 4 horse rider station : providing, designing and fixing of horse rider station of size 1000 x 600 x 1100 mm as per image- 04 in dnit ( + or - veriation in size 10% allowed to accommodate larger number of manufacturers ) fabricated with main post of 114 mm dia and 3.0 mm thick and other pipes of 40 mm dia 2.5 mm thick made up of hot rolled tubular steel and hot dipped galvanized and powder coated 80-120 micron thick using akzo nobel or equivalent in desired shade and colour. all welding joints of pipe shall be robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. zinc primer paint to be applied at all the welding points prior to finishing. all open ends of pipe to be closed with gi / lldpe caps, base plate cover shall be made of vergin lldpe plastic by rotational molded with minimum 4 mm thickness uv resistant and environment friendly and colour as approved by engineer in charge. high quality grip rubber should be used on handles. foothold shall be made of nylon alloywith rounded edges to prevent impact and injury . bearing used shall be maintenance free in the equipments manufactured by reputed com an duly oil sealed and self lubricated to be approved by engineer in charge . the equipment shall be fitted with in-built limiters to prevent unwanted movement. the equipment shall be fixed on ground with concrete of‘ minimum strength m-25 and j shaaped welded bolts and when concrete is set, fixing the equipment on to it and cover nuts and bolts with base place cover, all complete as per directions and approval of engineer-in-charge regarding material, shape of equipment, colour ( of metal, seat and pedal ) , and fixing of equipment etc including the cost of cement concrete and excavation work complete of commission of equipment. 5 triple twister : providing, designing and fixing of triple twister of size of twister 1700 x 1300 x 1300 mm as per image- 05 in dnit ( + or - veriation in size 10 % allowed to accommodate larger number of manufacturers ) fabricated with main post of 114 mm dia and 3.0 mm thick and other pipes of 40 mm dia 2.5 mm thick made up of hot rolled tubular steel and hot dipped galvanized and powder coated 80-120 micron thick using akzo nobel or equivalent in desired shade and colour. all welding joints of pipe shall be robotic welded with joints scalloped as necessary and dressed off removing shop edges and burrs. zinc primer paint to be applied at all the welding points prior to finishing. all open ends of pipe to be closed with gi / lldpe caps, base plate cover shall be made of vergin lldpe plastic by rotational molded with minimum 4 mm thickness uv resistant and environment friendly and colour as approved by engineer in charge. high quality grip rubber should be used on handles. foothold shall be made of nylon alloywith rounded edges to prevent impact and injury . bearing used shall be maintenance free in the equipments manufactured by reputed company duly oil sealed and self lubricated to be approved by engineer in charge . the equipment shall be fitted with in-built limiters to prevent unwanted movement. the equipment shall be fixed on ground with concrete of minimum strength m-25 and j shaaped welded bolts and when concrete is set, fixing the equipment on to it and cover nuts and bolts with base place cover, all complete as per directions and approval of engineer-in-charge regarding material. shape of equipment, colour ( of metal, seat and pedal ) , and fixing of equipment etc including the cost of cement concrete and excavation work complete.