provision of operational stores:-1 amn bunker in 10 inf div sector of size 4.35x2.6x2.20m built with pcc brick as per technical pecification, drawing and store / rate list. 2 steel roofing trough ( srt ) 1800mm long made out of 2mm thick @ 27 kgs each with tolerance -2% to +5%, hot rolled carbon steel sheet conforming to is specification with 16 nos 12mm dia long bolt, machine made ( heavy duty ) complete threaded with one nut and two washer of 30mm outer diameter and 3mm thick, per bolt, per srt. the overall width of srt shall be 613mm and height shall be 180mm. the srt shall be applied with one shop coat of red oxide primer. the shape of srt shall be regular and angle of bending shall be maintaned properly. the srt not found properly in shape shall be rejected. make : sail / tata 3 steel roofing trough ( srt ) isi marked 2440mm long made out of 2mm thick. @ 37 kgs each with tolerance -2 to +5%, hot rolled carbon steel sheet conforming to is specification with 16 nos 12mm dia long bolt, machine made ( heavy duty ) complete threaded with one nut and two washers of 30mm outer diameter and 3mm thick, per bolt, per srt. the overall width of srt shall be 613mm and height shall be 180mm. the srt shall be applied with one shop coat of red oxide primer the shape of srt shall be regular and angle of bending shall be maintaned properly. the srt not found properly in shape shall be rejected. make : sail / tata / 4 indian standard medium beam 150mm x 75mm x 3.7m long isi marked.make:- sail / tata. is specification 808-1989. 5 entrance canopy of size 2.0m x 2.60m at the entrance to be provided as per drg. cgis sheet 0.63mm and ridge 0.80mm shall be used as roof of canopy. frame for canopy to be of ms angle 40x40x5mm and 4 nos ms column of 40mm dia with base plate / top plate of 150x150x6mm with 4 nos predrilled holes to be fitted with 10mm dia nut and bolts and fdn bolts of 16mm dia 300mm long nut / bolts with washer. ( as in specification ) 6 isa 25x25x4mm and fi 25x3mm securing with ms sheet with nut and bolts for fals ceiling. 7 ms sheet 1.6mm thick and fi 25x3mm securing to angle iron and fi as specified in specificartion part ii. 8 8mm dia 25mm long bolt, nut and washer 9 ventilator of size 0.60x0.45m will be provided in ventilator with 02 nos 75mm of size cold rolled ms hinges and 01 no ms tower bolt of size 150mm and ms handle of fi 20x3mm of 125mm size included angle iron ( 40x40x5mm ) frame of size 0.62mx0.47m. ms hinges will be welded to shutter and frame both sides. two coats of synthetic enamel paint over a coat of primer. 10 prefabricated steel door 11 wooden plank of size 10x10x1 12 round tor steel tmt bar 12mm dia as per is 1786- 1979 make:- tata / sail 13 round tor steel tmt bar 8mm dia as per is 1786- 1979 make:- tata / sail 14 ms binding wire annealed for reinforcement binding of thickness 0.9mm 15 prefabricated gel earthing electrode of pipe technology. 16 readymix synthetic enamel paint drying og make :- asian / berger / nerolac 17 readymix synthetic enamel paint dark brown make : asian / berger / nerolac 18 turpentine oil make : asian / berger / nerolac 19 zinc chromate metal primer make : asian / berger / nerolac 20 painting brush 100mm dia make - horse 21 wall putty make : birla wall putty 22 emery paper 23 oil bound distemper make : asian / berger / nerolac 24 weather coat exterior paint og make : asian / berger / nerolac 25 weather coat exterior paint brown make : asian / berger / nerolac 26 weather coat exterior paint yellow make : asian / berger / nerolac 27 ldpe film as per is 2508-1984 shall contain not less than 2.0% of carbon black of an average particle size 300 micron, 4 mtr wide and sufficient adhesive of fixing make : silpaulin / supreme 28 hdpe sand bags ( uv proofed ) barrel type double stitched at one end std quality with inside lamination, size 840 x 360 mm with suitable tying cord as per is 14252-1995 and weight of each bag not less than 75 gm colour khaki. 29 wpc