improvement of 570 ( red ) mig bps by replacement of ( enm ) equipments etc. in ac-27:-1.01 supply of horizontal split casing pump of head: 42 mtr, discharge: 50 lps ( approx ) , 1475 rpm with impeller & neckring ( ci ) , casing ( ci ) , shaft & sleeve ( in standard construction ) in fitted condition suitable for 40 hp motor with suitable bearings and other parts. make: kirloskar / mather & platt / jyoti / djb approved make. 1.02 supply of suitable coupling-set and coupling guard for above pump-set. 1.03 supply of suitable m.s. base frame for above pump-set. 1.04 supply of ms bend heavy duty of size 150 mm dia. 90* with double flange. 1.05 supply of ms bend heavy duty of size 125 mm dia. 90* with double flange. 1.06 supply of m.s. flange of 150 mm dia. 1.07 supply of m.s. flange of 125 mm dia. 1.08 supply of nut bolts & washers. 1.09 supply of neoprene rubber packing sheet. 1.1 supply of ms reducer heavy duty of size 125 x 100 mm dia. with double flange. 1.11 s / o ms tee heavy duty of size 125 x 125 x 125 mm dia. 1.12 s / o ms pipe confirming to is:1239 part-i, medium 150 mm diameter. make: jindal / tata. 1.13 s / o ms pipe confirming to is: 1239 part-i, medium 125 mm diameter. make: jindal / tata. 1.14 supply of c.i.d. / f non-rising with ss spindle sluice valve, pn 1.0, c.i. body / wedge / bronze-rings / ss / 410 shaft construction of 150 mm size. make:- kirloskar / ivc. 1.15 supply of c.i.d. / f non-rising with ss spindle sluice valve, pn 1.0, c.i. body / wedge / bronze-rings / ss / 410 shaft construction of 125 mm size. make:- kirloskar / ivc. 1.16 supply of c.i.d. / f swing type non-return valve, pn 1.0, c.i. body / door / bronze to rubber rings / ss / 410 hinge pin construction of 125 mm size. make:- kirloskar / ivc. 1.17 dismantling of existing pumps & motors from the m.s base frame valves, bends, pipes etc. of both side ( suction & delivery side ) by doing all such work as per site requirement & taking out all the equipments from the base frame / foundation. 1.18 breaking of the existing rcc foundation & dismantling the existing m.s. base frame and making of rcc foundation by cement concrete, m.s. jal etc. and fixing of above m.s. base frame with foundation nut-bolts of suibable size etc. as per pump-set & site requirement. 1.19 breaking of existing damaged floor and removing the dust, soil etc. providing and fixing at or near ground level precast cement concrete flooring 1:2:4 ( 1 cement: 2 coarse sand: 4 graded stone aggregate ) finished with a floating coat of neat cement, including cement slurry, plastering of floor 1.2 installation and fitting of pumps & motors ( motor will be provided by the deptt. ) on the base-frame / foundation and coupled the pump-set. the job also includes installation & fixing of valves, pipes, bends, reducers, flanges etc. of both side ( suction & delivery side ) including primer & paint on complete equipments as per the site requirement & proper alignment of pump-sets after taking all safety precaution arrangements, all tools & tackles etc.