tender for under 15th fc untied grant – work-7- construction work of cc gate road in hathi wali gali, ward no. 21. - cement concrete with 4 cm gauge approved brick ballast, fin sand & cement in the proportion of 12:6:1 including supply of all materials, labour, tools & plants, labour cess etc. required for proper completion of the work s.i.no 273 2 m-150 brick work in cement mortar in proportion pf 1:4 (1cement and 4 coarse sand) in foundation & plinth including supply of all material, labour, t&p etc required for propercomletion of the wprk.as per s.i.no. 305a 3 12mm thick plaster with cement and coarse sand pf 2.20 fineness modules in 1:4 over brick work minumum thickness not to be less than 1cm. including supply of all materials, labour, tools & plant etc. required for proper completion of the work. as per s.i. no.584 4 construction of granular sub-base by providing coars graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at desired density, including cost of all material, labour, t&p including all taxes, royalty, labour cess complete, as per mort clause 401. 5 construction of unreinforcd dowel jointed anti expansion and constructionjoint only plain cement concrte pavement , thickness as per design over a prepared sub base with 43 grade cement are only oter type as per clause 1501.2.2(1:1.5:3) coarse and fine aggregates conferming to is 383 maximum size of coarse aggregates complete item. 6 r.c.c work with cement, approve coarse sand & 2 cm gauge approved stone grit in proportions of 1:2:4 in slab excluding supply of rainforcement and its bending, but including its fixing and binding the same with 24 b.w.g.g.i. binding wire and including necessary centering and shuttering etc. and supply od all meterials, labour, t&p etc. required for peoper completion of the work including cost of binding wire. the rate excludes making of drip course which shall be paid extra 7 m.s. (tor steel or plain) in plain work such as r.c.c. or r.b. work including bending for proper shape and including supply of steel & its wastage, bend hooks and authorised overlapping shall be measured and including cost of binding wire. as per s.i.no. 504