tender for wooden cabinet wall panelling computer work station roller blind and water proofing treatment work of cabin no 1511 of cheif engineer camp office in sbe lko, wooden cabinet,wall panneling, computer work station,roller blind and water proofing treatment work of cabin no-1511 of chief engineer camp office in s.b.extn building lko sl. no. item description 1 laying and jointing pvc pipe. heading 2 providing and laying four courses water proofing treatment with bitumen felt (hessian base)type 3 grade i conforming to is : 1322 over roofs consisting of first and third courses of blownbitumen 85/25 or 90/15 conforming to is : 702 applied hot @ 1.45 kg per square metre of area for each course, second course of roofingfelt type 3 grade-i (hessian based self finished bitumen felt) and fourth and final course of stone grit 6 mm and down size or pea sizedgravel spread at 6 cubic decimeter per square metre, including preparation of surface but excluding grading complete. 3 providing & fixing of excutive office computer work station cum work table of different sizes as per requirmentfitted in 12th floor south wingof shakti bhawan extn. building. the unit shall be measered by length x breadth of worktop and0.76 mtr hight. the entire above unit shall be fabricatrd with 19 mm block board superior quality swastik made all extirior surface with approved quality 1 mm sunmica laminate and intirior faces finished with 10x20 mm thick sprit polish teak wood beading.t.one no drawer nd one flap door fabricated with the help of 19 mm block board swastik block board /green or equivalenthe cup-board shall have lockablemagnet door fabricated with 19mm block board fixed to cup-board with magnet and having in handle the main table rack shall be approved matel handle and necessery m.p lock. all drawrs shall be provided with approved qaulity slider machnism. the foot board shall be also provided in above three peace .the work include cost of all labour,material t&p required for proper completion of work. 4 providing & making & fixing of wall panneling as per drawingframework to be covered with 12 mm thick plywood fromthe help of fevicol,nails and screw. then making grooves with 6mm mdf ply with the help of fevicol,nails and screw. the final surface to be finished with 1mm thick laminateand grooves topolished as per design..as per requirement and direction of engineer i/c including cost of all material, labour, t & p etc required for proper completion of work.. 5 repairing ofof executive office computer work station cum work table of size-1500x900x750 in diffrent room of shakti bhawan extn. building. top surface finished with approved quality 1 mm sunmica laminate and intirior faces finished with 10x20 mm thick sprit polish teak wood beading. . onenumber lockable drawersone lockable cupboard 400mm wide finished with1 mm sunmica laminate f .one no lock and one no handle fitted in drawer and cupboard . & back side covered..the work include cost of all labour,material t&p required for proper completion of work. 6 replacing existing old damage tile and fixing newfalse ceiling with 12mm thick arm strong soft mineral fibre type ceiling with required hanger including supply of all materials, labour and t & p etc required for proper completion of work. 7 providing and fixing in place a full height storage cabinet 450 mm deep made with 19 mm thick isi marked ply borad, all interior surfaces to finished with pasting of 0.8 mm thick mica and all exterior surfaces to be finshed with pasting of 1 mm thick mica of texture and colour as approved by engineer in charge including all labour, t&p, other items like (but not limited to) fevicol, nails screws, higes, sliders,door handles, multipurpose lock of godrej or equivalent rate etc. required for proper completion of works, to be measured interms of front area only. 8 providing & fixing of roller blinds of approved shade as per drawing & specificationas approved by the architect/ engineer -in-charge