tender for road safety of shahganj inam naraina papi road (odr). - excavation for roadwork in soil with hydraulic excavator including cutting and loading in tippers, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross sections, and transporting to the embankment location within all lifts and lead upto 1000m. as per sor 2 construction of granular sub-base by providing close graded material, mixing in a mechanical mix plant at omc, carriage of mixed material to work site, spreading in uniform layers with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per clause 401 3 providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at omc in mechanical mix plant carriage of mixed material by tipper to site, laying in uniform layers with paver in sub- base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density. 4 providing and applying primer coat with ss1 grade bitumen emulsion on prepared surface of granular base including clearing of road surface and spraying primer at the rate of 0.70to 1.00 kg/sqm using mechanical means. 5 providing and laying dense graded bituminous macadam with 60-90 tph batch type hmp producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder @ 4.50 percent by weight of total mix and filler, fransporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per morth specification clause no. 505 complete in all respects. 6 providing and applying tack coat withbitumen vg-10 using pressure distributor at the rate of 0.30 kg per sqm on the prepared granular surfaces treated with primer & cleaned with mechanical broom as per technical specification clause 503. 7 providing and laying bituminous concrete with 100-120 tph batch type hot mix plant producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder @ 5.4 to 5.6per centof mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per morth specification clause no. 509 complete in all respects 8 construction of sub-grade and earthen shoulders with approved material obtained from borrow pits with all lifts & leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table no. 300-2 9 providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per irc:35 .the finished surface to be level, uniform and free from streaks and holes. page no. 54 item no.2 10 supply and fixing of pavement maker ( cat eye ) type x-astmd-4956-04.every dimension 3 m ( usa make ) adherant plotting compound. the housing shall contain prismetic two glass covered prismetic reflective face to reflect incident light i/c all taxes.page no. 54 item no.5 11 dirctiona and place identification signs up to 0.90 sqm sige board providing and erecting direction and place identification retro-reflectorised as per -67 made of high intensity grade sheeting the retro reflective sheeting shall be tested for a cerficate of having the sheeting tested for coefficient of bretro reflicetion day time colour and luminance , shrinkage flexibility sheeting tested for vcoefficient of retro reflection , day time colour and fungus resistance , 3 years out door weathering and its having passed these tests shall be obtained from international/ government laboratory /institute by the manufacturar of the sheeting and in case the certificate is oblained from international condition, it should also be obtained from indian condition within 3 years of launching of product by the manufacture in abroad, alternatively, a certificate conforming to as tm specifcation (d 4956-09) on artificial accelerated weathering requirments from a reputed laborratory in india can be accepted provisionnally in such 2 sifuation , the employer /client ,if so desires, could seek for a performance guarantee which would be released after receipt of certificate meeling the requlrement of three years outdoor weathering of the sheeling as per irc 67:2012: legends, letters, numerals and bord etc should be as per morthspecification no-801.3.7 sheet fixed over aluminium sheeting 2 mm thick with area not exceeding 0.9 sqm supported on a mild steel single angle iron post 75 mm x 75 mmx6mm firmly fixed to the ground by means of properly designed foundation with m 15 grade cement concrete 45 cm x45cm x60cm,60 cm belowground leave as per approved drawing . complete.page no. 57 item no.19 12 retro-refiectorised traffic sign as per irc-67-2012providingand fixing of retro-refleectorised cautionary, mandatory and informatory sign as per irc-2012 made of high intensity grade sheeting type -iv vide clause 801.3, fixed over aluminium sheeting 1.5 mm thick supported on a mild steel iron post 75 mm x 75 mmx6mm firmly fixed to the ground by means of properly designed foundation with m 15 grade cement concrete 45 cm x45cm x60cm,60 cm belowground leave as per approved drawing . the retro reflective sheeting shall be tested for a certificate of having the sheeting tested for coeffcient of reflection day time colour and luminance shnnkage fiexibility, liner removal adhesion impact resistance, specular gloss and fungus resistance, 3 years out door weathering and its having passed these tests shall be obtained from international/ government laboratory /institute by the manufacturar of the sheeting and in case the certificate is oblained from international condition, it should also be obtained from indian condition within 3 years of launching of product by the manufacture in abroad, alternatively, a certificate conforming to as tm specifcation (d 4956-09) on artificial accelerated weathering requirments from a reputed laborratory in india can be accepted provisionnally in such 2 sifuation , the employer /client ,if so desires, could seek for a performance guarantee which would be released after receipt of certificate meeling the requlrement of three years outdoor weathering of the sheeling as per irc 67:2012: legends, letters, numerals and bord etc should be as per morthspecification no-801.3.7 proof of the same in from of govermment report shall be uploaded while quoting tender. (1) 90cm equilateral trengle with difrent plenth size (20cmx60cm).page no. 57 item no.18(i) 13 retro-refiectorised traffic sign as per irc-67-2012providingand fixing of retro-refleectorised cautionary, mandatory and informatory sign as per irc-2012 made of high intensity grade sheeting type -iv vide clause 801.3, fixed over aluminium sheeting 1.5 mm thick supported on a mild steel iron post 75 mm x 75 mmx6mm firmly fixed to the ground by means of properly designed foundation with m 15 grade cement concrete 45 cm x45cm x60cm,60 cm belowground leave as per approved drawing . the retro reflective sheeting shall be tested for a certificate of having the sheeting tested for coeffcient of reflection day time colour and luminance shnnkage fiexibility, liner removal adhesion impact resistance, specular gloss and fungus resistance, 3 years out door weathering and its having passed these tests shall be obtained from international/ government laboratory /institute by the manufacturar of the sheeting and in case the certificate is oblained from international condition, it should also be obtained from indian condition within 3 years of launching of product by the manufacture in abroad, alternatively, a certificate conforming to as tm specifcation (d 4956-09) on artificial accelerated weathering requirments from a reputed laborratory in india can be accepted provisionnally in such 2 sifuation , the employer /client ,if so desires, could seek for a performance guarantee which would be released after receipt of certificate meeling the requlrement of three years outdoor weathering of the sheeling as per irc 67:2012: legends, letters, numerals and bord etc should be as per morthspecification no-801.3.7 proof of the same in from of govermment report shall be uploaded while quoting tender. (x) 30x90cm (left/right) object hazard.page no. 57 item no.18(x) 14 supply & fixing of retro reflective tree plate having size 15cm x 15cm cons/sting typoe xi retro reflectivesheeting fixed over 1.50 mm thick aluminum sheet including labour, materal t&p etc for proper completion of the work the rate shall include all materinals, lobour, t&p, transportation installation and incldentais all complete as per direction of the engineer-in-charge. page no. 58 item no.4 15 supply and installation of delinator (road way indicators. hazard markers, object marker) 1.2m long and 100 mm x 50mm, painted black colour and red, white and yellow strips of 60 cm continuous strip in two side reflcetorised panel at the top buried of pressed into the ground and conforming to irc:79 and the drawing installation work shall be as per relevant clauses of morth specification section 800 and irc 67 2010 complete in all respect. for both side reflectorized panel. page no. 54 item no.1 16 morth-801 retro-reflectorised traffic sign as per irc-67-2012 providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per irc 67-2012 made of high intensity grade sheeting type-iv vide clause 801.3. fixed over aluminium sheeting 15 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground bymeans of property designed foundation with m 15 grade cement concrete 45 cm x 45 cm x 60 cm 60 cm below ground level as per approved drawing. the retro reflective sheeting shall be tested for a certificate of having the sheeting tested for coefficient of retro reflection, daytime colour and luminance shrinkage, flexibility, liner removal, adhesion, impact resistance, specular gloss and fungus resistance, 3 years outdoor weathering and its having passed these tests shall be obtained from international govemment laboratory/ institute by the manufacturer of the sheeting and in case the certificate is obtained from international condition, it should also be obtained from indian condition within 3 years of launching of product by the manufacture in abroad. alternatively, a certificate conforming to astm specification (d 4956-09) on artificial accelerated weathering requirements from a reputed laboratory in india can be accepted provisionally. in such a situation, the employer / client, if so desires. could seek for a performance guarantee which would be released after receipt of certificate meeting the requirement of three years outdoor weathering of the sheeting as per irc 67 2012. legends, letters numerals and borders etc should be as per morth specification no-801.3.7. proof of the same in form of government report shall be uploaded while quoting tender. page-57 item no. 18(x)i) 30x90 cm object hazard