supply of labour and supply and fixing of electrical item for balance work of residence building typ b-04 no at fire satation samthar, jhansi andi jhansi-2 first class bricks works in 1:6 cement and coarse sand of 1.25f.m. mortar in foundation upto plinth supply of all labour and t&p etc. required for proper completion of the work including providing scaffolding rope, chahlies fixing and removal. in foundation. 3 first class bricks works in 1:4 cement and course sand of 1.25f.m. mortar in above plinth supply of all labour and t&p etc. required for proper completion of the work. but in super structure in 115mm wall including providing scaffolding rope, chahlies fixing and removal. in super structure work. 4 fixing of m.s. angle iron door, windows, ventilator frame made of approved m.s. angle iron wroght to required form including drilling hole, welding and reciting where necessary and also including supply of all materials etc. and also including all taxes, wastage andall respect as per direction of engineer in charge for proper completion of work at site of work. 5 fixing s.s. railing stair case 6 fixing of m.s. angle iron z section window (approved section) with specified design of grill out side openable design of windowexcluding glass pans. 7 fixing of m.s. grill of approved quality and drawing made of flat iron including supply of all labour and t&p etc all respect as per direction of engineer-in-charge 8 first class bricks works in 1:3 cement and course sand of 1.25f.m. mortar in above plinth supply of all labour and t&p etc. required for proper completion of the work. but in super structure in 115mm wall including providing scaffolding rope, chahlies fixing and removal. 9 r.c.c. work with cement approved course sand and 2 cm (3/4)” gauge approved stone ballast in the proportions of 1:1½;3 in outer work excluding supply of reinforcement and its bending but including its fixing and bending the same with 24 b.w.g.g.i. binding wire and including necessary centering etc. and also including supply of alllabours and t&p etc. . column 10 r.c.c. work with cement approved course sand and 2 cm (3/4)” gauge approved stone ballast in the proportions of 1:1½;3 in outer work excluding supply of reinforcement and its bending but including its fixing and bending the same with 24 b.w.g.g.i. binding wire and including necessary centering etc. and also including supply of alllabours and t&p etc. . linter & sunshade 11 r.c.c. work with cement approved course sand and 2 cm (3/4)” gauge approved stone ballast in the proportions of 1:1½;3 in outer work excluding supply of reinforcement and its bending but including its fixing and bending the same with 24 b.w.g.g.i. binding wire and including necessary centering etc. and also including supply of alllabours and t&p etc. . beam 12 r.c.c. work with cement approved course sand and 2 cm (3/4)” gauge approved stone ballast in the proportions of 1:1½;3 in outer work excluding supply of reinforcement and its bending but including its fixing and bending the same with 24 b.w.g.g.i. binding wire and including necessary centering etc. and also including supply of alllabours and t&p etc. .slab 13 centering and shuttering including strutting, propping etc. and removal of form for all rcc work. 14 mild steel or iron in plain work such as reinforced concrete or reinforced brick work (when not included in an over all rates) wrougth to required shape as necessary including bending for proper completion of the work . r.c.c. work 15 filling of sand also including supply of all labour and t&p etc. required for proper completion of the work. 16 cement concrete in 1:4:8 with cement, sand and (22.40-43)mm granite stone ballast (crusher broken) in foundation including supply of all labours and t&p etc. required for proper completion of work. 17 10 mm thick plaster with cement mortar over brick work minimum thickness not to be less than 3/8”(10mm) thick including supply of all labour and t&p etc. required for proper completion of the work for proper completion of the work but with cement and approved coarse sand in 1:6 cement & fine sand of 1.25f.m. mortar. inside 18 first class bricks works in 1:3 cement and course sand of 1.25f.m. mortar in above plinth supply of all labour and t&p etc. required for proper completion of the work. but in super structure in 115mm wall including providing scaffolding rope, chahlies fixing and removal. 19 15 mm thick plaster with cement mortar over brick work minimum thickness not to be less than 3/8”(10mm) thick including supply of all labour and t&p etc. required for proper completion of the work for proper completion of the work but with cement and approved coarse sand in 1:6 cement & fine sand of 1.25f.m. mortar. inside 20 12mm thick plaster with cement mortar over brick work minimum thickness not to be less than 3/8”(10mm) thick including supply of all labour and t&p etc. required for proper completion of the work for proper completion of the work but with cement and approved coarse sand in 1:6 cement & fine sand of 1.25f.m. mortar. in outside 21 10 mm thick plaster with cement mortar over brick work minimum thickness not to be less than 3/8”(10mm) thick including supply of all labour and t&p etc. required for proper completion of the work for proper completion of the work but with cement and approved coarse sand in 1:6 cement & fine sand of 1.25f.m. mortar. inside 22 laying of 8 to 10mm thick ivory or light shade vitrified tiles of 600mmx600mm size in flooring or skirting laid with 1:3 ( 1cement : 3 coarse sand) finishing with cement slurry & with pigment grouting & polishing complete i/c supply of all labour t&p required for proper completion of work. in flooring 23 laying of 8 to 10mm thick ivory or light shade vitrified tiles of 600mmx600 mm size in flooring or skirting laid with 1:3 ( 1cement : 3 coarse sand) finishing with cement slurry & with pigment grouting & polishing complete i/c supply of all labour t&p required for proper completion of work. in skiting 24 laying of 20mm thick kota stone flooring over 20mm thick base of cement mortar 1:4 (1cement: 4 coarse sand) laid over jointed with grey cement slurry mixed with pigment to match the shade of slab complete. 25 fixing 5mm thick china white glazed tiles in flooring or in skirting or dado laid with 1:3 cement and approved coarse sand mortar finished with white cement slurry jointing and polishing complete including supply of all labour and tools etc. required for completion of the work . (size of tiles upto 200x300 mm) in flooring 26 fixing 5mm thick china white glazed tiles in flooring or in skirting or dado laid with 1:3 cement and approved coarse sand mortar finished with white cement slurry jointing and polishing complete including supply of all labour and tools etc. required for completion of the work . (size of tiles upto 200x300 mm) in wall 27 making grooves 10 to 12mm wide x 8mm deep in plaster on the wall or in ceiling etc. 28 making of drip couars in same shade or faces i/x supply of all materials, labour etc. 29 fixing of 35cm (1.1/4”) thick commercial quality (kanju) sitapur ply or other approved ply wood flush shutters. 30 fixing of oxidize door fitting. 31 putty two coated including all t&p etc complete. 32 wall painting with acrylic emulsion paint, having voc (volatile organic compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. 33 weather coat two coat coats------- finishing walls with acrylic smooth exterior paint of required shade 13.46.1 new work (two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm) sqm 90.00 34 painting or varnishing on iron works in small areas or new wood work with one coat of ready mixed priming paint & one coat of approved superior quality ready mixed paint or clear synthetic varnish including supply of all materials labour and t&p etc. required for proper completion of the work. paint to be used should confirm to the isi no.103 1950 (in two coat.) wood work. 35 red oxide primer paint on iron surface 36 fixing panes of glass with equal or equivalent isi marked quality putty brads and springs and including supply of all materials and labour ete complete. (3.80 to 4.7mm thick) 37 fixing of aluminium sheet 24 gauge in door shutter with b & snew----toilet 38 25mm(1½”) thick 1:2:4 plain cement concrete floor with cement, approved coarse sand and 2cm(3/4”) graded approved stone laid in panels finished with 3mm. (1/8”) flooring coat of neat cement or cement and marble dust in 5:1 as specified over removing and over lapping mortar at the joints of panel sand removing any and giving them a uniform finish including supply of all labour and t&p etc. required for proper completion of the work. 39 25mm(1½”) thick 1:2:4 plain cement concrete floor with cement, approved coarse sand and 2cm(3/4”) graded approved stone laid in panels finished with 3mm. (1/8”) flooring coat of neat cement or cement and marble dust in 5:1 as specified over removing and over lapping mortar at the joints of panel sand removing any and giving them a uniform finish including supply of all labour and t&p etc. required for proper completion of the work. 40 fixing of jali door shutter in teak wood 41 fixing of stainless steel masqutio proof jali window. 42 fixing of ward rob shutter 43 fixing of grenite stone flooring and nosing window sil and courter 44 providing edge moulding to 18 mm thick marble stone counters, vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by engineer-in-charge. 45 filling of sinder in sukan portion of toilet 46 fixing of m.s. sheet door 47 laying “brick bat coba” 100 mm thick laid with m-150 class brick bat coba 7.50 cm thick with gap of 15mm to each other 20mm thick base of cement mortar 1:4 cement and coarse sand mixed with water proofing compound spreading cement slurry mixed with aerelic cement concrete water proofing compound filled gaps of coba & including supply of all labour t&p etc. required for proper completion of work and as per direction of e.i.c. 48 fixing 110mmø pvc pipe complete with rose heads bends m.s. clamps 2.5cmx3mm fixed to walls by 15cm long 6mmø nail and including repair of plaster pointing etc if damaged during fixing of the pipes including cost of all labour, tools and plant etc. required for proper completion of work. 49 making khurra 50 providing and fixing double scaffolding system (cup lock type) on the exterior side, up to seven story height made with 40 mm dia m.s. tube 1.5 m centre to centre, horizontal & vertical tubes joining with cup & lock system with m.s. tubes, m.s. tube challies, m.s. clamps and m.s. staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it there after .the scaffolding system shall be stiffened with bracings, runners, connection with the building etc wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and approval of engineerin- charge .the elevational area of the scaffolding shall be measured for payment purpose .the payment will be made once irrespective of duration of scaffolding. 51 casting of man hole chamber 600x600x750 52 fixing of p.v.c pipe 150 mm dia 53 supply of labour for sanitary & water supply 54 fixing of european type white glazed earthen ware w.c. pan indian approved 1st quality isi marked backlight seat cover and lit of c.p. brass hinges and rubber buffers. 55 fixing ist quality w.c. orrisa pan white glazed earthen ware isi marked wc pan size 580mm(hindustan, cera make) including supply of all materials, labour and t&p etc. required for proper completion of work. 56 fixing of wash hand basin size 550x400mm isi marked basin (hindustan, cera, parrywere make) 57 laying of stanless steel sink of size 600x450x200mm with drainges board 58 fixing of c.p. brass towel rail 600mm size together with pair of c.p. brass brackets to fit towel rail. 59 fixing of 600x400mm beveled edge mirror of superior glass mounted on 6mm thick a.c. sheet or plywood sheet and fixed to plastic sleeves with c.p. brass screws and washers. 60 fixing of c.p. soap dise. 61 fixing of pvc tank 1000 lits. 62 fixing of angle cock 63 fixing of 15mmø c.p. short body bib cock. 64 fixing of 100x75mm pvc nahani trap. 65 fixing of c.p.waste 32mmø 66 fixing of c.p.waste 40mmø 67 fixing of c.p. jali 100mmø 68 fixing of c.i. door tee 100mmø 69 fixing of c.i. door tee 75mmø 70 fixing of c.i. door bend 100mmø 71 fixing of c.i. door bend 75mmø 72 supply and fixing of m.s. clamp.100mmø 73 supply and fixing of m.s. clamp.75mmø 74 making lead joint 100mmø 75 making lead joint 75mmø 76 fixing of c.i.pipe isi mark c.i.pipe 100mmø 77 fixing of c.i.pipe isi mark c.i.pipe 75mmø 78 fixing of g.i.pipe 15mmø 79 fixing of g.i.pipe 20mmø 80 fixing of g.i.pipe 25mmø 81 fixing of 15mm pvc connection 45mm long. 82 fixing of gate valve.25mmø 83 fixing of gate valve. 15mmø 84 fixing of c.i. collar 100mmø 85 fixing of c.i. collar 75mmø 86 cutting of hole in r.c.c. 87 fixing of c.i. plan bend 100mmø 88 fixing of c.i. plan bend 75mmø 89 supply of labour for construction of apron drain 250mm wide 90 excavation in foundation insoil mixed with moram/kankar in bundelkhand area requiring use of specials tools and plants such as pick axes and sabbal etc. (rate ins including royality) 91 supply and filling of sand. 92 cement concrete in 1:4:8 with cement, sand and (22.40-43)mm granite stone ballast (crusher broken) in foundation including supply of alllabours and t&p etc. required for proper completion of work. 93 first class bricks works in 1:4 cement and course sand of 1.25f.m. mortar in above plinth supply of all labour and t&p etc. required for proper completion of the work. but in super structure in 230mm wall including providing scaffolding rope, chahlies fixing and removal. in super structure. 94 25mm cement concrete flooring 1:2:4 ( 1 cement: 2 coarse sand:4 graded stone aggregate of size 12.5mm and below) by laid over concrete finished with floating coat of neat cement (base concrete to be paid separately) including fixing of glass strips. (excluding cost of glass strips.) 95 2cm. (.3/4”) thick cement plaster in on drain side & top in 1:2 consisting of one part of cement and 2 part in panels, finished with 3mm. (1/8”) floating coat of neat cement or cement and marble dust in redio of 5:1 including supply of all materials labour and t&p etc. required for proper completion of the work. 96 electric work (labour with material) 97 wring point for light with 1.5 sq. mm frlsh insulated multistrend single core copper conductor cable in pvc conduit with 1.5 sq. mm fr pvc insuleted multistrend copper conductor cable as earthwire drawn inside modular switch & celling rose angle/ batten holder on 3mm thick phenolic paminated backlite sheet etc.complete in all respect. 98 wring point for fan/fresh air fan with 1.5 sq. mm frlsh insulated multistrend single core copper conductor cable in pvc conduit with 1.5 sqmm fr pvc insuleted multistrend copper conductor cable as earthwire drawn inside modular switch & celling rose angle/batten holder on 3mm thick phenotic paminated backlite sheet etc. complete in all respect. 99 wring point for plugwith 1.5 sq. mm frlsh insulated multistrend single core copper conductor cable in pvc conduit with 1.5 sq. mm fr pvc insuleted multistrend copper conductor cable as earthwire drawn inside modular switch & socket etc. complete in all respect. 100 wring point for call bell points with 1.5 sq. mm frlsh insulated multistrend single core copper conductor cable in pvc conduit with 1.5 sq. mm fr pvc insuleted multistrend copper conductor cable as earthwire drawn inside modular switch & socket etc. complete in all respect. 101 supply & wiring of submains with two number 10 sq.mm pvc insulated single core copper conductor in 25mm dia heavy duty pvc conduit with 1 no. 6 sq.mm fr pvc insulated multistrend single core copper conductor cable as earth continulty wire drawn inside the conduit complete in all respect. 102 supply & wiring of submains with two number 6.0 sq.mm pvc insulated single core copper conductor in 20mm dia heavy duty pvc conduit with 1 no. 4sq.mm fr pvc insulated multistrend single core copper conductor cable as earth continulty wire drawn inside the conduit complete in all respect. 103 supply & wiring of submains with two number 2.5 sq.mm pvc insulated single core copper conductor in 20mm dia heavy duty pvc conduit with 1 no. 1.5sq.mm fr pvc insulated multistrend single core copper conductor cable as earth continulty wire drawn inside the conduit complete in all respect. 104 supply and wiring of 4 number 10 sq. mm. frlshpvc insulated 1100 v grade single core copperconductor cable in 32 mm dia heavy guage rigid steelconduit on surface, with two number 6 sq mm singlecore copper conductor cable as earth continuity wiredrawn in coudit , complete in all respect. 105 s/f of led tube light with batten suitable for up to 1 x22 watt led tube light complete including tube etc on surface complete in all respect. cat - aaa 106 supply and fixing of 24 watt to 32 watt lumen above 3300 surface mounting led squre ceiling fitting having powder coated die cast aluminium housing body with extended heat sink, diffuser of polycarbonate meterial and drive set complete in all respect. cat- aaa 107 s/laying of al conductor pvc insulated armoured served sheathed cables 1100 volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. on surface the cable run shall be fixed on m.s. clamps etc. of suitable size of as directed by the engineer - incharge, complete in all respect. the armouring of the cable ahsll be properly connected with the earth conductor by clamps etc.35 sq.mm 3.5 core. 108 supply & erection of factory fabricated and wired metal cald dust and vermin proof floor mounting m. s. channel base with bottom and top cable entreis electrical controlpanel with tpn mccb (fore pole 36 ka with thermal maganatic release) switches complete and instrument chamberetc. complete in all respects. the instrument chamber shall be separate and shall comprise of flush type digital metering system for phase to phase voltage and single phase voltage, current and other parameter (kva,p.f,kw etc) in each phase with touch type selector switches for different readings, instrument fuses, current transformer etc. the panel board shall have suitable capacity electrolyticaluminium busbars as per is8623 or above istulated with heat shrink sleeving and mounted on non hygroscopic supports such as cmc/dmc support with deteachable side covers and shall be suitable for extension on the sides. the mccbs shall be complete with suitable cable end boxes, compression glands and indicating lamp on incoming etc.the job includes the grounting of the board as per direction of engineer-in-charge. all out goings of 100 amp. and above will be provided shall be fabricated with crca sheet with a minimum thickness of 1.6 mm/2 mm. cubicle type switch board shall be of cat a & b only.incoming : - 100 ampmccb - 01 no.outgoing : -63 amp mccb - 03 no. 109 s&l of 25mm x 3mm g.i. strip from earth electrode directly in the ground as requird complete in all respect. 110 supply & burying of earthing electrode t-19 (hot dip galvanized), length 300mm, outer pipe 50mm, inner pipe 25, terminal dia 12mm, outer gi pipe of 16 swg and inner gi pipe of 12 swg with hot dip galvanization up to 100 micron filled with crystllingnce conductive mixture (ccm) having anti corrosive & conductive property with 50 kgs activated soil (bfc) capable of reducing the soil resistivity with good mixture of retaining capacity along with 30 cm squre c.i. frame with hinged cove & masonty housing. (from electrode terminal to switch board, cost of 25x3 g.i. strip will be extra) make: as approved in u.p.p.w.d., & c.p.r.i. certified. 111 s/f of 6amp. to 32 amp. spmcb (10 ka) cat - a 112 s&f of 63 amp dp mcb cat-b 113 s&f of 40 amp sp mcb cat-b 114 s&f of 50 amp to 63 amp sp mcb cat-b 115 s&f of 63amp 4 pole mcb (10 ka) cat- b 116 s&f surface/flush mounting 4 waysv tpn distribution board without mcb complete in all respect, as directed at site byengineer in charge. cat -a 117 s&f surface/flush mounting 8 ways spn distribution board without mcb complete in all respect, as directed at site byengineer in charge. cat -a 118 s&f surface/flush mounting 4 ways spn distribution board without mcb complete in all respect, as directed at site byengineer in charge. cat -a 119 erection and testing ofcelling fan and regulator etc. excluding supply of down rad, complete in all respect. 120 s/f of hexagonal fan box with hexagonal side of approx 80mm in legnth fabricated from 16 swg ms sheet incorporating 10 mm dia, ms round bar as per approved complete in all respect. 121 s/f of electronic fan regulator (modular) 120-280 v isi marked on the existing switch board including making connection, required material, labour t&p etc. complete in all respect. 122 s/f of power plug with 20 amp/250 volt flush type modular switch and 5 pin 20 a/250 volt flush type universal modular socket switch on concealed m.s. box including supply of all material, labour t&p etc. required for proper completion of work. 123 supply & wiring of submains with two number 1.5 sqmm pvc insulated single core copper conductor in 20mm dia heavy duty pvc conduit with 1 no. 1.5sqmm fr pvc insulated multistrend single core drawn inside the conduit complete in all respect. 124 s/f of 16 gauge m.s drum duly painted includidng making hole in the wall for exhaust fan and finishing properly complete in all respect with luvers dully painted. 125 supply and fixing of led street light fitting havingdie cast aluminium body and diffuser with driver setsuitable for 75 to 90 watt. confirming to ip 66 andabove protection complete in all respect. 126 s/f fan sheet cover of backelite sheet 127 s/f of ceiling fan 1200 mm 5 star rated :- bajaj/havells/ usha/ crompton. 128 s/f ofled bulb 9 watt 129 s/f of light duty exhaust fan 12 dia 130 s/f ofexhaust fan lours 12 dia 131 supply and fixing of fire extinguisher, abc type 6.00kg. capacity (isi marked is : 15683 & tac approved)complete with initial charge and wall bracket, along withsupply of all materials and labour for proper completionof work. 132 supply and fixing of c02 type fire extinguisher 4.5 kg.capacity (isi marked is : 2878 & tac approved)complete with initial charge and wall bracket, along withsupply of all materials and labour for proper completionof work. 133 s/f ofcall bell