tender for emergency work in sub division first under ee, edd, barabanki- 1 safe loading carriage including unloading and proper stacking of following materials from central store barabanki / je store to site of work. 2 pcc pole / stp pole 8.5 / 11 / 13 mtr long 3 11kv pin insulator . 4 11kv disc insulator . 5 33kv pin insulator . 6 33kv disc insulator . 7 11kv x-arm 8 33 kv x-arm 9 abc cable 3x95 sq. mm. 10 abc cable 3x50 sq. mm. 11 abc cable 1x25+1x16 sq. mm. 12 11 kv xple cable 13 acsr weasal conductor 14 other line material 15 pcc pole 9 mtr long 16 dragging of pole from je dump store to site 17 erection of stay set of 16x1800 mm rod duly painted with red oxide, anchor plate, thumble turn buckle andstay insulate etc. digging of pit of size of size 0.4x0.6x1.6 m for grouting 1:3:6 cement concrete, with stay of size 7 / 8 swg, nuzzling & grouting. 18 stringing and sagging of old & damage 11 kv linewith acsr weasal conductor including nuzzling binding and jumpering ( weasal conductor will be provided by the department ) 19 errectionof old & damage substation type double pole with pcc pole 9 / 8.5 mtr. long including mounting of top channal dropper channel, base angle with clamps with nut & bolt 33 / 11 kv line including grouting of support and plinthing 300 mm above ground level, fitting of 33 / 11 kv pin & pin insulator. 1 / 6 of total lenght of poles will remain under the ground and planted on stone pad of size 300x300x75 mm. 20 fabrication and erection of singlepole support on pcc pole / febrication of tilted pcc / stp pole complete in all respect. 21 fabrication and erection of singlepole support on 9 mtr pcc pole / febrication of tilted pcc / stp pole complete in all respect. 22 stringing and sagging of lt 1x25 abc cable ( lt abc cable will be provided by the department ) 23 stringing and sagging of lt 3x50 abc cable ( lt abc cable will be provided by the department ) 24 stringing and sagging of lt 3x95 abc cable ( lt abc cable will be provided by the department ) 25 provinding & fixing nut & bolt 26 provinding & fixingltpvc cable 3.5x185mm 4 wire 27 clamp for top / dropper and t-off channel etc. 28 looping and choopping of tree branches in laying on the route of line. 29 grouting of pcc / stp using cement with 1:4:8 ratio cement, sand & brick ballast & including digging of pit and fixing of all accessories in all respect. 30 grouting and binding of stay in 1:4:8 ration using cement, sand and brick ballast complete in all respect. 31 laying of 11kv xlpe cable 3x70, 120, 185 sq.by mm manually 32 fabricate with hole suitable size in steel items, receive from central store lightas top channel / dropper channel sub station base angle etc.