quotation for constructional store/materials bricks , ppgi sheets , ridges , ceiling materials , quotation for constructional materials , supply of class a burnt clay bricks conform to the requirements of is :1077 with minimum compressive strength not less than 8 . 4 mpa for individual bricks and mean strength not less than 10 . 5 mpa for group pf 5 specimens with other specifications as per para 1003 of mort&h specifications . appx size 23x11 . 25x7 . 5cm , supplying and fixing of ceiling with ac sheet rhino/everest/jumbo board 2x2 , thickness 1 . 25 cm on gi frame . , ppgi sheet 12 ft long thickness 0 . 60 mm ( make: tata/jindal ) isi mark with following specifications:- ( a ) profile - trapezoidal ( b ) thickness of top coat -20-30 micron ( c ) thickness of bottom coat - 7 micron ( d ) grade of zink coating - 120 ( e ) width of sheet after profile shaped - 1080 mm ( f ) pitch of profile - 203 mm ( g ) depth of profile - 27 mm ( h ) number of corrugation/ trapezoidal - 6 , ppgi sheet 10 ft long thickness 0 . 60 mm ( make: tata/jindal ) isi mark with all specifications mentioned at s/no 1 . 03 , ppgi sheet 8 ft long thickness 0 . 60 mm ( make: tata/jindal ) isi mark with all specifications mentioned at s/no 1 . 03 , ppgi sheet 6 ft long thickness 0 . 60 mm ( make: tata/jindal ) isi mark with all specifications mentioned at s/no 1 . 03 , gi ridge profile sheet size 0 . 61 mtr x 3 mtr long for suitabily fitting on above ppgi sheets with coating of paint and zink same as of ppgi sheets above s/no 1 . 03 to 1 . 06 , profile screw self driven for fixing ppgi sheets