tender for misc. civil repairing,renovation,sanitary,water supply and painting work for staff quarter building at katjuridanga ofc compound, bankura; providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering-all work up to plinth level: 1:3:6 (1 cement: 3 coarse sand zone-lll) derived from natural sources: 6 graded stone aggregate 20 mm nominal size derived from natural sources). providing and laying cement concrete in retaining walls, retum walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor, etc., up to floor five level, excluding the cost of centering, shuttering and finishing 1:1%:3 (1 cement: 1% coarse sand(zone) derived from natural sources: 3 graded stone aggregate 20 mm nominal size derived from natural sources). 1:2:4 (1 cement: 2 coarse sand (zone-) derived from natural sources: 4 graded stone aggregate 20 mm nominal size derived from natural sources) centering and shuttering including strutting. propping etc. and removal of form for: columns, pillars, piers, abutments, posts and struts weather shade, chajjas, corbels etc., including edges brick work with common burnt clay f.p.s. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor v level in all shapes and sizes in cement mortar 1:4 (1 cement: 4 coarse sand) providing wood work in frames of doors. windows, derestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately). kiln seasoned and chemically treated hollock wood. providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows, fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of engineer-in-charge. (note: butt hinges and necessary screws shall be paid separately) kiln seasoned and chemically treated hollock wood 35 mm thick shutters providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (area of opening for panel inserts excluding portion inside grooves or rebates to be measured). panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick. kiln seasoned and chemically treated hollock wood. providing and fixing m.s. grills of required pattern in frames of windows etc. with m.s flats, square or round bars etc. including priming coat with approved steel primer all. complete fixed to steel windows by welding providing 40x5 mm flat iron hold fast 400 mm long including fixing to frame with 10 mm diameter boits, nuts and wooden plugs and embedding in cement concrete block 300x100x150 mm 1:36 mix (1 cement: 3 coarse sand: 6 graded stone aggregate 20 mm nominal size) providing and fixing isi marked is:1341 ms. pressed butt hinges bright finished with necessary screws etc. complete: 100x58x1.90 πιπι 75x47x1.70 mm 50x37x1.50 mm 6 mm cement plaster of mix: 1:3 (1 cement: 3 fine sand) providing and fixing aluminium tower bolts isi marked anodised (anodic coating not less than grade ac 10 as per is: 1868) transparent or dyed to required colour of shade with necessary screws etc. complete 250x10 mm .... more in document