tender for necessary repair/painting work of shri sumit kumar j.e. residence in district panchayat ashwasia colony ambedkar nagar - repairs to plaster of thickness 12 mm to 20 mm in patches of area2.5 sq meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of engineer-in-charge 3 demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of engineer-in-charge. 4 scraping old white or colour wash including disposal of refuse as directed by the engineer-in-charge within a distance of 60 metre (200 feet). 5 providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete 6 finishing walls with premium acrylic smooth exterior paint with silicone additives 7 providing and laying vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conkerming to is:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick coment mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry 3.3 kghsqm including grouting the joints with white cement and matching pigments etc. the tiles must be cut with the zero chipping diamond cutter only, laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily. 8 crazy ceramic tile flooring, with under layer 12 mm thick cement mortar 1:4 (1 cement: 4 coarse sand), with joints not exceeding 5 mm, including filling the gaps with ordinary cement mixture & mixing with synthetic polyester fibre, triangular in shape having specific gravity of 1.34 to 1.40, cross section size ranging from 10 to 40 micron & length upto 6 mm, mixing fibre @ 125 grams per 50 kg of cement in cement mortar, including providing and mixing water proofing material in mortar @ 1 kg per 50 kg of cement, all complete as per direction of engineer-in-charge 9 providing and fixing glazed screen printed border tile 75mm wide having thickness 5mm, of approved quality & make, in all shades, design and prints, in dado, over 12mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg/sqm including pointing with white cement mixed with pigment of matching shade, all complete as approved by engineer - in - charge 10 painting or varnishing work in small areas or new wood work with one coat (upto one square metre of ready mixed priming paint and one coat of approved superior quality ready mixed paint or varnish including supply of all materials, labour, tools & plants etc. required for proper completion of the work. paint to be used isi marked. 11 mr repairs of senatory pipes work. 12 providing and fixing stainless steel (grade 304) 13 repairing of doors, windows etc kitchien, wooden work. 14 providing and fixing chlorinated polyvinyl chloride (cpvc) pipes, having thermal stability for hot & cold water supply, including all cpvc plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. this includes jointing of pipes & fittings with one step cpvc solvent cement and testing of joints complete as per direction of engineer in charge 15 s/f celling fan isi mark 16 s/f geyser 25 itr 17 s/f exhaust fan 18 15mm nominal bore 19 wiring for light/fan point. 20 providing and fixing c.p. brass bib cock of approved quality conforming 21 providing and fixing c.p. brass long nose bib cock of approved quality conforming to is standards and weighing not less than 810 gms. 22 granite stone slab of colour black chrrry. 23 providing and fixing 6mm thik both sides 24 providing and fixing 35 mm thick factory made laminated veneer lumber door shutter conforming to is: 14616 and tads 15:2001 (part b), fixing with butt hinges of required size with necessary screws, all complete as per directions of engineer-in-charge and panelling with panels of: 12 mm thick plain grade -1, medium density flat pressed three layer particle board fpt-i or graded wood particle board fpt-i, is: 3087 marked, bonded with bwp type synthetic resin adhesive as per is: 848 25 s/f of steel gate 26 add gst @ 18%