running contract for edd-deoband-2 safe cartage of st/ pcc poles up to 8..5/11 mtr. from esc, sre/je store to site of work at various sites including loading & unloading at both ends.(dist.up to 25 km.) 3 safely cartage of other complete line material (except pcc /st poles) from esc, sre je store to site of work at various sites including loading, unloading at both ends. ( dist.app. 0 to 25 km.) 4 erection of single support on st/ pcc poles up to 8.5/11 mtr long with complete fitting of all accessories of 11 kv/lt line.as per respo specification. 5 fixing of 11 kv stay rods by digging of pits in block of 600x600x300 mm. & with new brick and nozzling of stay wire 7/10 swg and fitting the same on the pole 6 providing & fixing of lt clamp with nuts bolts made of new ms flat iron 50x6 mm on pcc poles as per respo specification. 7 providing of lt shekel insulator of size 100x115mm 8 providing of nuts & bolts for lt shekel insulator of size 180x19mm half threading. 9 providing & fixing of x-arm holding clamps pcc /st poles with nuts bolts made of new ms flat iron 50x6 mm as per respo specification. 10 providing & fixing of f-brackets pcc /st poles with nuts bolts made of new ms flat iron 50x6 mm on pcc poles as per respo specification. 11 laying, lifting, stringing, sagging jumpring & binding of for 11kv/lt line as per respo specification including complete. na-acsr weasel/rabbit conductor 12 safely removal of 160 kva t/f from the plinth after opening ht & lt connection and with shifitng the t/f from the site to esc, sre/je store with loading & unloading at both ends. 13 safe cartage of 250 kva t/f from esc, sre, to the site of work including loading & unloading at both ends.(distance 0 to 25 km.) 14 construction of plinth for installation of 250 kva t/f of size 1.5x1.5x1.5 mtr. made of 9 thick wall in all the four sides with 6 thick rcc top duly filled with sand & plastered 12 mm. thick in ratio 1:4 with cement & sand on outer surface of brick wall . 15 removal of 25/63/100 kva t/f from the existing d/p after opening ht & lt connection and with shifting the t/f from the site to esc, sre/je store with loading & unloading at both ends. 16 safe cartage of 25/63/ 100 kva t/f from esc,sre, to the site of work including loading & unloading at both ends. (dist. upto 25 km.) 17 safe installation of 25/63/100 kva t/f on the double pole with complete fittings including making connections and commissioning. 18 safe installation of 250 kva t/f on the plinth with complete fittings including making connections and commissioning. 19 tightening of loose stay including opening, binding and nozzling of stay wire. 20 earthing of 250 kva t/f by boring of 60 ft deep & fixing of 60 ft. g.i pipe 11/2 dia (jindal class b) and connecting with g.i. strip of size 40x5 mm and g.i wire at bottom of g.i pipe to the t/f providing of required charcoal & salt in the pipe 21 re-straightening of tilted pcc pole/st pole up to 13 mtr.of 11 kv & lt lines with opening, binding and jumpering of conductor. 22 re-sagging of loose conductor of 11 kv / lt line with opening binding & re-binding with jumpring. 23 removal of old damaged weasel conductor / g.i wire from the existing 11kv, lt lines with making roll of conductor and shifting the same to esc, sre/j.e (store) including loading and unloading at both ends. 24 off shooting of tree branches touching the 11 kv/lt line.