material supply to dundhariya - ghadla, kankar mitti, chuna lime, cement, p.p.c, fine aggregate, sand, fly ash, stone dhips, stone grit, binding materials, bricks, sand stone, almirah, tand, dpc, sill coping, ruff kota stone, marble stone, fr pvc insulated copper conductor, wooden fittings, doors, structural steel, iron, winding wire, iron guarder, grills, cement concrete grills, glass, paint, enamel paint, primer, diesel, mobil oil, bitumen board, sheet, gi sheet, ms sheet, indian w.c, orrisa water closet , europeam w.c, wash basin, pvc waste pipe, cp bib cock, cp pillar cock, steel conduit, pvc water tank, steel fasteners, module gi box, jundtion box, cover plate, modular switch, modular socket, pin, mcb db, gi pipe, brass wire ci amid ms cover plate .pipe, roller, truck, pumping set, dumper, cultivator, providing manpower assistant, electrician, plumber, wireman, unskilled labour, etc minimum 40mm thick , 1.5 m to 2.40 m length, minimum 50mm thick , 2.4 m to 3.0 m length, minimum 65mm thick , above 3.0 m length, minimum 75mm thick , precast tiles / blocks , glazed size-30x45 cm , mosaic size-40mm thick , vitrified size-60x60 cm , interlock tiles/brick/block for road work , cement interlocking block m-30grade, 60mm thick , cement interlocking block m-30grade, 80mm thick , cement interlocking block m-30grade, 100mm thick , (size 12 guage wire and 12 guage strad/12 guage wire and 14 guage strad/14 guage , construction of tubewell 200mm dia from ground levels and up to 150mtr depth and above to accommodate housing and assembly pipe in all type of alluvium strata, unconsolidated formation such as pebbles, bouldersetc by percussion/ rotary drilling method having minimum bore size of 445 mm and with gravel and packing as per is:2800( part-1& part-ii) 1979 as amended up to date. with supply of bail plug if necessary. the work will not include cost of housing pipe and stainer pipe assembly cost, gravel and development work. work would be deemed completed only after obtaining sand free water during pumping , construction of tubewell 150mm dia from ground levels and up to 150mtr depth and above to accommodate housing and assembly pipe in all type of alluvium strata, unconsolidated formation such as pebbles, bouldersetc by percussion/ rotary drilling method having minimum bore size of 445 mm and with gravel and packing as per is:2800( part-1& part-ii) 1979 as amended up to date. with supply of bail plug if necessary. the work will not include cost of housing pipe and stainer pipe assembly cost, gravel and development work. work would be deemed completed only after obtaining sand free water during pumping , supply of erw ms black casing pipe of 1500mm nominal bore &5.4mm thickness conforming is:4270/2001 of grade fe410