running contract against time to time sanctioned linkage in the area of edd behat-2 safely cartage of pcc pole 8.5 mtr. long from esc, sre to the site of work including loading unloading at both ends. ( dist. up to 30 km. ) 3 safely cartage of other complete material ( except st poles ) from esc, sre to j.e. store & other place thanthe site of work including loading unloading at both ends. ( dist. up to 30 km. ) 4 fabrication and erection of double pole on pcc pole 8.5 mtr. longwith completefitting of all accessories of lt line as per respo specification. 5 erection of single support on pcc poles up to 8.5 mtrlong with complete fitting of all accessories of11 kv as per respo specification. 6 fixing of 11 kv stay rods by digging of pits in block of 600x600x300 mm. &with new brick and nozzling of stay wire 7 / 10 swg and fitting the same on the pole 7 safe cartage of 25 / 63 kva t / f from esc, sre, to the site of work including loading & unloading at both ends. ( dist. upto 25 km. ) 8 safe installation of 25 / 63 kva t / f on the double pole with complete fittings including making connections and commissioning. 9 providing& fixing of all type clampof pccpoles with nuts bolts made of new ms flat iron 50x6 mm as per respo specification. 10 laying, lifting, stringing, sagging jumpring & binding of acsr weasel conductor for 11 kv line as per respo specification including complete. 11 re-sagging f loose conductor of 11 kv lines ( consisting of 3 phase ) with opening, binding & re-jumpering of conductor. 12 re-straightening of tilted r.s.joist / st / pcc poles of 11 kv & lt lines with opening, binding and jumpering of conductor. 13 earthing of pole by earthing road. 14 off shooting of tree branches touching the above 11 kv line