work construction and supply of accessories for 132kv d / c amawan-inox and amawan-tripula ckt . -i under etd raebareli-2 survey including recreation of schedule of material, making of locations ( root length ) , gps survey of line with co-ordinate of each tower ( the length of line shall be authenticated by gps survey ) 3 check survey 4 cost of excavation of 132 kv tower fondation pits including all earth work back, levelling etc. 5 setting of stubs including all foundation work but excluding the cost of concerting and excavation ( rate per location ) for following 132 kv dc towers:- 6 da 7 db 8 dc 9 cost of concreting for all types of 132 kv dc tower foundation including cost of cooping and following- 10 1:3:6 concreting ( p.c.c. ) 11 1:2:4 concreting ( r.c.c ) 12 installation of steel reinforcement bars in r.c.c foundation including cost of steel reinforcement bars with cutting, bending, placing, bending etc. 13 erection of superstructure of 132kv da, db, dc towers, their extensions and crossing gantry structures wherever required including all work above ground level excluding hoisting of insulators, hardware & accessories but including fitting, fixing & punching of danger number, phase plates& bird guard on superstructure. 14 tack welding of all the bolts up to the height of one section of the tower or 5 meter from ground level whichever is higher with three tacks at 1200seperation of minimum 10 mm thickness with 10mm / 12 electrode & application of zinc rich aluminium paint on the affected surface including cost of all material including tack welding of river crossing tower & anchor towers. 15 laying, stringing, tensioning clamping, jointing etc of acsr panther conductor including hoisting of insulator, fitting of all necessary hardware and accessories i.e. fitting armour rods, vibraton dampers etc on all six phases of 132 kv sc lines. 16 laying, stringing, tensioning clamping, jointing, including fitting of all necessary hardware and accessories of opgw, termination at s / s, end to end connectivity & testing etc. 17 grounding work including earth work etc for pipe type grounding including cost of coke & salt. 18 de-stringing of panther conductor and earthwire 7 / 10 swg including insulator hardware fitting conductor accessories such as clamp, tension clamp, suspension clamp, vibration dampers, armour rod etc including rerolling of conductor in drum including cost of all labour and t&p length about approx 2.5 km. 19 dismantling of old towers and proper stacking at site for shifting the material from site to upptcl store including labour and t&p. 20 transportation of dismantalled tower material, conductor & accessories from different sites of line to upptcl store and new conductor & earthwire from upptcl store to site alongwith loading & unloading. 21 part-b ( supply ) 22 tower & gantry accessories- 23 number plate 24 danger plate 25 phase plate in sets of red, blue and yellow for tension towers 26 bird guard for 132 kv suspension towers 27 132kv pipe type earthing material for towers 28 foundation anchor bolt 28x900mm for gantry 29 porcelain disc insulators 30 70 kn 31 120 kn 32 hardware suitable for acsr panther 33 single suspension fittings 34 single tension fittings 35 double tension fittings 36 conductor accessories suitable for acsr panther 37 vibration dampers 38 mid span compression joint 39 repair sleeves 40 performed armour rod