43 / w / edc-i / sre / 2022-23 full deposit work under edd deoband, 2 safety cartage of pcc / sp 55 poles from esc, sre / j.e. store to the site of work at various sites including loading & unloading at both ends ( distance 0 to 50 k.m. ) 3 safety cartage of other lines material ( except pcc poles ) from esc, sre / j.e. store to the site of work at various sites including loading & unloading at both ends ( distance 0 to 50 k.m. ) 4 providing of holdingclamp / with nuts bolts made of new ms flat iron 50x6 mm on sp 55 poles. 5 providing of f clamp / with nuts bolts made of new ms flat iron 50x6 mm on sp 55 poles. 6 providing of stayclamp / with nuts bolts made of new ms flat iron 50x6 mm on sp 55 poles. 7 erection of single support on pcc poles with complete fitting of all accessories of lt & ht line. 8 concreting of pole as per respo specification. 9 laying, lifting, stringing, sagging jump ring & binding of acsr rabit conductor for ht line. 10 red oxide pents of pole. 11 earthing of pole by earthing rod. 12 removal of old & damaged acsr conductor from the existing poles with making bundle & shifting the same from site to je store / esc, sre including loading & unloading at both ends. 13 dismentling of pole. 14 fabrication and erection of d / p on pcc poles / sp55 8.5 mtr. long with complete fitting including concreting in block of 450x450x1500mm. in ratio 1:4:8 with cement, sand and brick ballast size 1”x1.5” as per respo specification. 15 safety cartage of dismentling pole from site to esc, sre / j.e. store including loading & unloading at both ends ( distance 0 to 50 k.m. ) 16 providing and fixing of all type of nut& bolt. 17 grouting of stay rods by digging of pits in block 600x600x300 mm & cementconcreting in ratio 1:4:8 with cement, sand and brick ballast and nozzling of stay wire 7 / 10 swg and fitting the same on the pole including fixing of stay insulator in stay wire. 18 of shooting of tree branches touching the above 11 kv line. ( no of tree approx 400 no. )