running contract work in the area of edsd-ghunna under edd i saharanpur-2 safe cartage of st/ pcc poles up to 8.5/11/13 mtr. from esc, sre/je store to site of work at various sites including loading & unloading at both ends.(dist.up to 30 km.) 3 safely cartage of other complete line material (except pcc /st poles) from esc, sre je store to site of work at various sites including loading, unloading at both ends.( dist.app. 0 to 30 km.) 4 erection of single support on st/ pcc poles up to 8.5/11/13 mtr long with complete fitting of all accessories of 11 kv/lt line.as per respo specification. 5 fabrication and erection of double on st/ pcc poles up to 13 mtr long with complete fitting with all accessories as per respo specification. 6 fixing of 11 kv stay rods by digging of pits in block of 600x600x300 mm. & with new brick and nozzling of stay wire 7/10 swg and fitting the same on the pole 7 providing & fixing of lt clamp with nuts bolts made of new ms flat iron 50x6 mm on pcc poles as per respo specification. 8 providing of lt shekel insulator of size 100x115mm 9 providing of nuts & bolts for lt shekel insulator of size 180x19mm half threading. 10 providing & fixing of x-arm holding clamps pcc /st poles with nuts bolts made of new ms flat iron 50x6 mm as per respo specification. 11 providing & fixing of f-brackets pcc /st poles with nuts bolts made of new ms flat iron 50x6 mm on pcc poles as per respo specification. 12 laying, lifting, stringing, sagging jumpring & binding of for 11kv/lt line as per respo specification including complete. na-acsr rabbit conductor 13 b-acsr weasel conductor 14 safe cartage of 250 kva t/f from esc, sre, to the site of work including loading & unloading at both ends.(distance 0 to 60 km.) 15 construction of plinth for installation of 250 kva t/f of size 1.5x1.5x1.5 mtr. made of 9 thick wall in all the four sides with 6 thick rcc top duly filled with sand & plastered 12 mm. thick in ratio 1:4 with cement & sand on outer surface of brick wall . 16 safe cartage of 25/63/ 100 kva t/f from esc,sre, to the site of work including loading & unloading at both ends. (dist. upto 40 km.) 17 removal of 25/63/100 kva t/f from the existing d/p after opening ht & lt connection and with shifting the t/f from the site to esc, sre/je store with loading & unloading at both ends. 18 safe installation of 25/63/100 kva t/f on the double pole with complete fittings including making connections and commissioning. 19 safe installation of 250 kva t/f on the plinth with complete fittings including making connections and commissioning. 20 laying, lifting, stringing, proper sagging abc cable of size 3x50+1x35+1x16 sq.mm. including fixing of all type clamps and connector providing all accessories. 21 laying and making connections of lt pvc/xlpe cable 3.5x70sq.mm./3.5x150/1x240 sq.mm. from t/f to double pole (approx to 20 mtr).