tender for civil work - dense carpet-strengthening of road by dense carpeting road from vikash sheel apartmentto atamvalabh apartmentsector-13 rohini in ward 53 / m-i rz., dsr 2018 and approved items; 2 16.31.1.2:providing and applying tack coat using bitumen emulsion conforming to is:8887, using emulsion pressure distributer including preparing the surface & cleaning with mechanical broom.with rapid setting bitumen emulsionon bituminous surface @ 0.25kg / sqm 3 16.55.2:providing and laying bituminous macadam using crushed stone aggregates of specified grading premixed with bituminous binder, transported to site by tippers, laid over a previously prepared surface with paver finisher equiped with electronic sensor to the required grade, level and alignment and rolling with smooth wheeled, vibratory and tandem rollers as per specifications to achieve the desired compaction and density, complete as per specificatons and directions of engineer-in-charge.50 to 100 mm average compacted thickness with bitumen of grade vg-30 @ 3.50% ( percentage by weight of total mix ) prepared in drum type hot mix plant of 60- 90 tph capacity. 4 16.57.5:providing and laying bituminous concrete using crushed stone aggregates of specified grading, premixed with bituminous binder and filler, transporting the hot mix to work site by tippers, laying with paver finisher equiped with electronic sensor to the required grade, level and alignment and rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction and density as per specification, complete and as per directions of engineer-in-charge.40 / 50 mm compacted thickness with bitumen of grade vg-30 @ 5.5% ( percentage by weight of total mix ) and lime filler @ 3% ( percentage by weight of aggregate ) prepared in drum type hot mix plant of 60-90 tph capacity 5 16.62:providing and applying 2.5 mm thick road marking strips ( retro - reflective ) of specified shade / colour using hot thermoplastic material by fully / semi automatic thermoplastic paint applicator machine fitted with profile shoe, glass beads dispenser, propane tank heater and profile shoe heater, driven by experienced operator on road surface including cost of material, labour, t & p, cleaning the road surface of all dirt, seals, oil grease and foreign material etc. complete as per direction of engineer - incharge and accordance with applicable specifications . 6 110.10:providing and fiving name board made of ms sheet 90x60cm, 1mm thick with frame of ms angle 50x50x6mm, two diagonal braces at the back of the sheet of ms flat 40x6mm, total height of the board above ground level 2.40m, length of legs below ground 0.30m embedded in cc block 1:2:4 ( 1 cement: 2 coarse sand: 4 graded stone aggregate 20mm nominal size ) 30x30x45cm including excavation and removal of surplus earth with in 50m lead, applying priming coat of approved steel primer, painting with synthetic enamel paint of approved quality and lettering with enamel paint of approved colour ( one side ) as per drawing / direction of engineer-in-charge