tender for annual rate contract of misc work in municipa area - 1 dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonry, cement concrete, wood work, steel work, including t&p and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with all lifts and lead of 50 metres as directed by engineer. cement concrete grade m-15 and above and pcc blocks 2 carriage of materials by mechanical transport including loading, unloading and stacking 2 km lead. 3 providing 1.20 metre high fencing with angle iron posts 50 mm x 50 mm x 6 mm at 3 metre center to center with 0.40 metre embedded in m15 grade cement concrete, corner, end and every 10th post to be strutted, provided with welded steel wire fabric of 75 mm x 50 mm mesh or 75 mm x 25 mm mesh and fixed to iron posts by flat iron 50 x 5 mm and bolts etc. complete in all respects including all material, labour. 4 steel work welded in built up sections/ framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.in gratings, frames, guard bar, ladder, railings, brackets, gates andsimilar works. 5 providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per irc :67 made of encapsulated lens type reflective sheeting vide clause 801.3, fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 3 metre long and size 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with m15 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing including all material, labour. 80 mm x 60 mm rectangular 6 supplying, erecting and fixing in position specified precast rcc bench made of rcc grade m-30 consisting of 2 nos. “l” shaped base support of thickness 100 mm back height 1000mm, front height 450 mm, base width 420mm and 5 nos. rcc planks of size of 1500x100 x 50 mm and 1 nos rcc planks of 150x200x50mm including joining all parts with galvanised nuts and bolts of suitable size. all bolts to be sealed after assembly with nice finish and appearance and level complete in all respect as per direction of engineer in-charge. every bench should have a manufacturer’s logo of appropriate size engraved at suitable place. 7 providing and fixing tree guard 0.60 metre square,2.00 metre high fabricated with ms angle iron 30 x 30 x 3 mm,ms iron 25 x 3 mm and steel wire3 mm dia welded and fabricated as per design in two halves bolted together. 8 providing and fixing of precast concrete interlocking tiles of desired shape of m 30 grade manufactured from fully computerized automatic stationery hydraulic vibrio pressed machine and fully computerized automatic batching plant of class a1/a2 as per bs 6717:2001. the cc interlocking paving blocks be laid on average 50mm. thick bed of coarse sand and the joint is to be filled with fine sand. laying procedure on compacted sub-base as defined.complete job is to be executed as per the instruction of engineer incharge. the rates to be inclusive of all lead & lifts etc. complete as per specifications. tensile splitting strength, abrasion and braking load etc. as per bs 6717:2001, grey cement. 60mm thick . 9 providing and fixing precast cement concrete m-20 grade (using mechanical concrete mixer) kerb stone top and bottom width 115 and 165 mm respectively, 250 mm high on 150 mm thick pcc m-10 grade foundation as per design, including fixing at site as per clause 408 of mort&h specification including all material, labour, machinery, lighting, guarding and maintenance of diversion. 10 providing and laying marking of center line and stop line etc with hot thermoplastic compound 2.5 mm thick on road/ plain surface, including reflectorising glass beads @ 250 gms per sqm area with special applicator machine, as per irc:35 including cleaning the surface of all dirt, dust and other foreign matter, demarcation at site and traffic control involved. the finished surface to be level, uniform and free from streaks and holes as per clause 803 of mort&h specification including all material, labour, machinery, lighting, guarding and maintenance of diversion. 11 supplying and stacking good earth at site of work. note: 1) loading, unloading and carriage to be paid extra as per actual lead.2)earth measured in stacks will be reduced by 20% foe payment 12 providing corrugated g.s. sheet roofing including vertical/ curved surface fixed with polymer coated j or l hooks, bolts and nuts 8 mm diameter with bitumen and g.i. limpet washers or with g.i. limpet washers filled with white lead and including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete upto any pitch in horizontal/ vertical or curved surfaces) excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.1.00mm thick with zinc coating not less than 275gm/m²