m.t on link road tikkari sarain jubbar road km 0/00 to 3/300 sh- mt works in km 0/00 to 1/00 , construction of granular sub-base by providing close graded material conforming to specifications, mixing in a mechanical mix plant at omc, carriage of mixed material by tippers to work site, for all leads & lifts, spreading in uniform layers of specified thickness with motor grader on prepared surface and ompacting with vibratory power roller to achieve the desired density, complete as per specifications and directions of engineer-in-charge. , wbm grading 2 providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with threewheel 80-100 kn static roller in stages to proper grade and camber, applying and brooming, crushable screening/binding materials to fill-up the interstices of coarse aggregate, watering and compacting to the required density grading 2 as per technical specification clause 405. (a) by manual means , prime coat providing and applying primer coat with bitumen emulsion (ss-1)on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70- 1.00 kg/sqm using mechanical means as per technical specification clause 502 with in all lead & lifts complete as per directions of the engineer-in-charge , tack coatproviding and applying tack coat with bitumen emulsion (rs-1)using emulsion distributor at the rate of 0.275 kg per sqm on the prepared dry and hungry bituminous surface cleaned with hydraulic broom as per technical specification clause 503. , providing and laying 30 mm thick bitumenious concretewith 100-120 tph capacity batchtype computrised hmp producing an avarage out put oof 75 tonne per hour using crushed aggrigate of specified grading ii premixed with vg-10 bitumenious binder as per job mix formula with minimum binder concrete of 5.50% of total weight of mix and filler,transportingthe hot mix to work site laying with hydro static paver finisher with sensor control to the required grade level and alignment,rolling with smooth wheeled, vibratory and tandem rollers to achieve the disered compction as per morth & hspecificationclause no. 509 complete in all respect including all leads and lifts as per directions of engineer in charge.