tender for development block-karvi, gram panchayat, coating maintenance work on bhaisondha-gadhighat second surface road work. - water bound macadam grading 2providing and laying ,spreading and compecting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness , hand packing, rolling with smooth wheeled 80-100 kn in stage to propergrade and camber, applying and brooming crushable, screening to fill up the intersticss of coarse aggregate, watering and compecting to the required density grading-2 as per t.s.c. 405 2 water bound macadam grading 3 providing and laying ,spreading and compecting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness , hand packing, rolling with smooth wheeled 80-100 kn in stage to proper grade and camber, applying and brooming crushable, screening to fill up the intersticss of coarse aggregate, watering and compecting to the required density grading-3 as per t.s.c. 405 3 prime coat providing and applying of primer coat with bitumen vg-10(ss) on preperad surface of granular base including clearing of road surface and spraying primer@ 0.70 kg./m2 using mechanical means. (as per mord specification) 4 tackcoat providing and applying of tack coat with bitumen [email protected] kg/sqm on the granular surface cleaned with hand broom including all type of labour t&p etc. 5 20 mm thick thick open graded premix carpet using bitumeinous providing and laying and rolling of open graded premex surface of 20 mm thickness composed of 13.2 mm and 11.2 mm aggregates either using vg-10 gradebitumen to required linegrade and level to serve as waering coarse on a previously prepered base by manual means including mixing in a suitable plant, laying and rolling with a smooth wheeled roller 8-10 tonne capacity, finished to required level and grade.(as per mord specification) 6 seal coat providing and laying seal coat by manual means with vg-10bitumen sealing the voids in the bitumenous surface laid to specified levels, grade and cross fall using type - c (as per mord specification) 7 p/laying of hot applid thermoplastic compound 2.5 mm thick includingreflectorising glass beads@250 gms per sqm area .thikness of 2.85 mm is exclusive of surface applied glass beads as per irc 35-2015.the finished surface to thelevel uniform and free from streaks and holes 8 e/w in filling & cutting in boths side patari 9 s/fixing 600 mm dia np3 pipe 10 s/f of sign board etc. complete.(granite stone)