construction of feeder and other bifurcation works under business plan 2024-25 (part-2), edd-bilaspur, rampur.- 1 carriage of the following material from store centre, rampur to work site including loading & unloading. 2 3x185 sqmm 11 kv xlpe cable 3 i/d & o/d cable jointing kits suitable for 3x185 sqmm xlpe cable 4 earthing complete 5 stay sate complete 6 acsr rabbit conductor 7 11 kv pin insulator 8 11 kv pin with nut 9 11 kv disc insulator 10 11 kv disc fitting 11 st pole 11 mtr long 12 x-arm 11 kv 13 11kv o/g vcb 200/100/5 with dp 14 ms channel cross arms 100x50x2240 mm (top channel) 15 ms angel iron 65x65x6 mm 2700 mm long bracing with 4 clamp 16 gi wire 8/10 swg 17 a) single pole structureexcavation of foundation pit in size of 75x45cm having depth of 1/6th of the full length of the support(pole)erection of support(pole) complete with providing and fixing of all clamps made of ms flat of size 75x8 mm. an other accessories . the work includes fabrication work and fixing of cross bracing sets 3.5 mtr from ms angle 65x65x6 mm/50x50x6 mm. the work includes cutting holes and providing ms bolts of 16x40 mm size in the middle of the cross bracing with 1 no. sparing washer of proper size. 18 stp pole 11 mtr long 19 grouting of support in cc 1:4:8(cement, sand & 40 mm. brick ballast) grouting will be done in the block of size 45x45cmx1/6th of full length of the support upto ground level, 30 cm plinth above the ground level with cc 1:3:6 (cement, course sand and stone grit) with muffing. the work includes back filling and proper ramming etc. 20 stp pole 11 mtr long 21 a) double pole structureexcavation of foundation pit in size of 75x45cm having depth of 1/6th of the full length of the support(pole)erection of support(pole) complete with providing and fixing of all clamps made of ms flat of size 75x8 mm. an other accessories . the work includes fabrication work and fixing of cross bracing sets 3.5 mtr from ms angle 65x65x6 mm/50x50x6 mm. the work includes cutting holes and providing ms bolts of 16x40 mm size in the middle of the cross bracing with 1 no. sparing washer of proper size. 22 stp pole 11 mtr long 23 grouting of support in cc 1:4:8(cement, sand & 40 mm. brick ballast) grouting will be done in the block of size 45x45cmx1/6th of full length of the support upto ground level, 30 cm plinth above the ground level with cc 1:3:6 (cement, course sand and stone grit) with muffing. the work includes back filling and proper ramming etc.a) double support 24 stp pole 11 mtr long 25 grouting of stay rods(20x1800)mm including all work of excavation, cement concrete in size of (0.60x0.60x0.30)m in the ratio of 1:4:8(cement, sand, 40mm brick ballast) including back filling of soil and proper ramming etc. 26 fixing, tightening and nozelling of stay wire with stay rod with the pole of required tension by providing stay clamps. 27 earthing of support with ms earth rod of (20x2500)mm long including excavation of pit and driving ms rod 3.0 m apart from support and 0.5 m below the ground level and connecting below the earth electrodes with the help of gi wire no. 8swg and earthing lugs. 28 fixing of 11 kv pin insulator with pin as per respo norms and as per direction of supervising engineer. 29 fixing of 11 kv disc insulatorwith fitting as per respo norms and as per direction of supervising engineer. 30 installing of 11 kv o/g vcb 200/100/5 with dp as per respo norms and as per direction of supervising engineer. 31 fixing of gi wire 8/10 swg as per respo norms and as per direction of supervising engineer. 32 laying,stringing and binding of acsr rabbit conductor per respo norms and as per direction of supervising engineer. 33 laying,stringing and binding of xlpe cable 3*185 sqmm with the help of cable jointing kit per respo norms and as per direction of supervising engineer. 34 providing and laying g.i. pipe 6 diaas perrespo norms and as direction of supervising engineer. 35 providing/fixing ofdanger board with clamp as perrespo norms and as direction of supervising engineer. 36 providing and fixing barbed wire as per direction of supervising engineer. 37 providing and fixing stone pad as per direction of supervising engineer. 38 providing/fixing of x-arm clamp with nut and bolts as perrespo norms and as direction of supervising engineer. 39 providing/fixing ofguarding angle as perrespo norms and as direction of supervising engineer. 40 road restoration chrges for pucca road cross (material provide by the contractor) as per direction of supervising engineer. 41 providing and laying hdpe pipe 120 mmas per direction of supervising engineer. 42 providing/fixing off-clamp with nut and bolts as perrespo norms and as direction of supervising engineer. 43 providing/fixing ofe-bracket with nut and bolts as perrespo norms and as direction of supervising engineer. 44 providing/fixing ofpg-clamp with nut and bolts as per respo norms and as direction of supervising engineer. 45 drilling of railway crossing and nahi( 02 site or approx 220 mtrs)as direction of supervising engineer.