tender for erection of dpp ,carraige of various material and other required works for strentheing of 132 kv bansi bay at 132 kv s/snaugarh under electricity transmission division-ii, basti - safe loading of 145 kv c.b with all accessories with the help of hydra/crane on private vehicle at 132 kv s/s bansi. 2 safe carriage of 145 kv c.bwith all accessories from 132 kv s/s bansi to 132 kv s/s naugarhthrough private vehicle. 3 safe un-loading of 145 kv c.b with all accessorieswith the help of hydra/crane on private vehicle at 132 kv s/s naugarh. 4 safe loading of 145 kv c.t with all accessories with the help of hydra/crane on private vehicle at 132 kv s/s itwa. 5 safe carriage of 145 kv c.twith all accessories from 132 kv s/s itwa to 132 kv s/s naugarhthrough private vehicle. 6 safe un-loading of 145 kv c.t with all accessorieswith the help of hydra/crane on private vehicle at 132 kv s/s naugarh. 7 safe loading, un-loading of 01 nos 145 kv bsiwith the help of hydra/crane at 132 kv ss bansi and naugarh respectivily. 8 safe carriage of01 nos 145kv bsithrough private vehcile from 132 kv ss bansi to 132 kvss naugarh . 9 shifting of 132 kv dpp panel from s/s store to control room safely & carefully by manual labour approximate distance 30 meter at abovesubstation grouting will be done if required. 10 erection of new dpp panel on 132 kv bansi bay at 132 kv ss naugarhas per proper alignment and direction of incharge engineer with making earthing by m.s flate(25x6mm /50x6mm) as per site requitement. (ms flate will be provided by contractor.) 11 making termination of all control cable alongwith proper ferruling and proper fastening of cable glands of proper size of above contro panel (cable glands &ferrules etc. shall be aranged by contractor at hisown cost ) including ct/pt connection. 12 laying of control cable as per cable schedule fornewly erected c.t,pt , lsi,bsi with all associcated work including proper bunching with the help of cable tie. 13 fabrication of sub-station structre (auxillary structure ) member which was not proper hole and alligement . including cutting , making of proper size hole, grinding and as per other requirement.