tender for supply of various chemicals for 1x660 mw ptep panki, kanpur. , ferric chloride 43 %physical state: liquid technical specifications are as follows: - colour: amber odor: none flammability (solid, gas): non flammable specific gravity / density: 1.4 g/mlsolubility: soluble in waterkinematic viscosity: 6.8 cst , poly electrolyte (100%) zetag 4120/jal floc 1012(an)(25 bag each) technical specifications are as follows: - polyacrylamide (anionic) product type: powder physical form: off-white granular solid anionic charge: medium-low molecular weight: very high specific gravity: 0.75 bulk density: 46.8 lb/ft3 ph 1% solution: 6-8 apparent viscosity/(cp) @ 25 °c concentration 0.25% 0.50% 1.0% , ammonia solution (25% min. as nh3, sp. gravity 0.91) ( as per is 799/1990) ar grade , hydrated lime as peris:1540-1990( part-ii)with latest amendment if any. technical specifications are as follows: - available lime as ca(oh)2: 80-85% by mass acid insoluble(as sio2): 1.0-.2.0% by mass iron(as fe2 03): 0.20%% (max. by mass) moisture: 1.0-.2.0% by mass alumina (as al2o3): 0.10% (max. by mass) magnesia (as mgo): 1.5%(max. by mass) dead burnt lime (as cao) 3.5% (max. by mass) physical properties a. colour white b. particle size: 200mesh c. physical state: free flowing fine powder the material shall be substantially free from ash, mud, core. , hydrazine hydrate (80% concentration (as per is 12086/1991) , hydrochloric acid (hci) 33% concentration (technical grade), specific gravity at 27°c: min 1.145, max 1.153 confirming to is: 265/1995 (with latest amendment, if any) technical specifications are as follows: - i. colour light yellow ii. hydrogen chloride: 33% by w/w hcl min iii. iron: 10 mg/kg as fe max, iv. oxidizing substance: 50mg/kg as cl2 max v. reducing substance: 50mg/kg as so2 max vi. residue on evaporation: 100mg/kg max, vii. sodium: 20mg/kg as na maximum viii. free chlorine & bromine: 5 ppm as hcl max note. (i) conc. of technical grade hcl less than 30% will not be acceptable. , sulfuric acidh2so4 sulfuric acidconcentration 98% as per is 266 , sodium hypo chloride (naocl) (10%) technical specifications are as follows: - appearance: yellow to light green liquid. odor: bleach like odor. solubility: infinitely soluble in water. specific gravity: 1.15 – 1.16 boiling point: 180 of decomposes slightly vapor pressure: 17.5 @ 68 f evaporation rate: < 1 (butyl acetate = 1) ph: 11 to 14