tender for electrical work for power supply to 36 bed head pannels in gims, greater noida - supply & wiring of submains with 2 nos. 2.5 sq.mm & with 1 no. earth wire of 1.5 sq.mm fr pvc insulated 1100 v grade single core multistrand copper conductor cable inpvc conduitpipe partly concealed including supply of all material, labourand t&p etc. required for proper completion of the work as directed by engineer i/c. 2 supplying and fixing 5 amps to 32 amps rating, 240/415 volts, c curve, miniature circuit breaker suitable for inductive load of following poles in the existing mcb db complete with connections, testing and commissioning etc. as required. 3 supplying and fixing 63 amps rating, 240/415 volts, c curve, miniature circuit breaker suitable for inductive load of following poles in the existing mcb db complete with connections, testing and commissioning etc. as required.four pole 4 providing and fixing following rating and breaking capacity and pole mccb with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required. 200a, 25ka, tpmccb 5 supplying and fixing cable end box (loose wire box)(ip 43) suitable for following triple pole and neutral, sheet steel, mcb distribution board, 415 v, on surface/ recess, complete with testing and commissioning etc. as required. for 6 way, double door tpn mcbdb 6 cable laying old cable tray cell foiling dismantling & re install 7 supply and laying of aluminium conductor pvc insulated armoured service sheated cables 1100 volts grade at a depth of 750 mm below ground level over a cushion of 75 mm thick. sand all around and protected with burnt bricks on sides and on top. on surface the cable run shall be fixed on m.s. clamps etc of suitable size or asdireced by the engineer-in-charge complete in all rec[ect. the amouring of the cable shall be properly connected with the earth conductor by clamp etc.(i) 16 sq. mm 4core