tender for 13.114 melamine polishing on wood work (one or more coat). , supply/fixing of wooden flooring , providing and fixing flat pressed three layer particle or graded plain wood board medium density exterior grade (grade i) fpt-1, conforming and marked to frame, backing or studding with screws etc. complete (frames, backing or studding to be paid separately): 9.17.1 12mmthick , providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately). kiln seasoned and chemically treated hollock wood 9.1.3 , 1 :4:8 (1 cement : 4 coarse sand (zone-ill) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) 4.1.8 , 12 mm cement plaster of mix 1:6 (1 cement: 6 fine sand) 13.1.2 , brick work with common burnt clay f.p.s. (non modular) bricks of class designation 7.5 in foundation and plinth in: cement mortar 1 :6 (1 cement: 6 coarse sand) 6.1.2 , finishing with deluxe multi surface paint system for interiors and exteriors using primer as per manufacturers specifications : 13.48.1 two or more coats applied on walls @ 1.25 ltr/10 sqm over and including one coat of special primer applied @ 0.75 ltr /10 sqm , job for locks,handles,and all , painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : 13.62.1 two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture , 11.41.2 providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to is: 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1 :4 (1 cement: 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joi