tender for work for deposit under edd-i baghpat, work related to deposit scheme (jhatpat / nivesh mitra etc.) in power distribution division-i baghpat, delivery of the following material from the power storage center baghpat/baraut/meerut to the 33/11 kv substation/work site, which includes loading and unloading. st pole (11m), pcc pole (8.5m) 10/16 kva converter 25 kva converter 63 kva transformer 100kva converter work of calling 70/120/185 sq.mm size xlpe cable from power storage center baghpat meerut to the site. work of collection of line material like 11 kv pin, 11 kv pin insulator, 11 kv disc, stay wire acsr weasel conductor etc. work of calling (1x16+1x25sq.mm) single phase ab cable from power storage center baghpat/meerut. work of calling lt abc (3x50+1x35+1x16 sq.mm), (3x95+1x70+1x16sq.mm) and (3x120+1x95+1x16) sq.mm. work of erecting 8.5/11 meter pcc pole by digging deep pit. to make double pole, erecting the pole by digging a pit and then filling the pit again. jieting cable box work of 70/120/185 sq.mm cable (jieting cable box kit will be paid by the department. the work of earthing of metering cubicles/converters by doing chemical earthing as per respo standards in which decentralized material will be paid by the tenderer. all line material work on double pole holding clamp with nut bolt 11kv pin insulator with pin 11 kv disc insulator with fittings ss channel 125x65x1300 mm t-off ss channel 125x65x2240 mm top ss channel 100x50x2028 mm dropper ss angle 75x75x6x2028 mm (converter base) polo grouting work. work of installing stay set (including grouting). work of installing 25/63/100 kva transformer on double pole. the work of earthing the neutral and body of the transformer. gudging work of ht lines (gl wire material will be paid by the tenderer) line construction work by acsr weasel conductor. work of making lt single face (1x25+1x16) sq.mm abc line. work of making lines of lt abc (3x50+1x35+1x16 sq.mm), (3x95+1x70+1x16sq.mm) and (3x120+1x95+1x16) sq.mm. connecting the consumer by making a jumper from the ht side and connecting the cable from the lt site. work of laying overhead xlpe 11 kv cable (by applying clamps/packing at appropriate distance through earthing/staywire between two poles) as per site requirement (decentralized material to be paid by the tenderer) as per requirement, underground cabling work through xlpe cable through 4/6 inch width hdpe pipe. (payable by pipe tenderer) 11 kv metering cubicle, ct-pt unit, cable jointing kit 3/4 nos.) collecting it from the storage center and delivering it to the installation site, filling the cable box and connecting it to the line, connecting it to the ct-pt unit and installing the 11 kv metering cubicle in the metering room. energizing the combination. (the meter on the connection will be installed by the department.) installation work of distribution box single / three phase including material. the work of picking up the material to be returned to the corporation from the site and depositing it safely in the storage center baghpat/baraut. materials payable by the contractor: lt clamp nut with bolt holding clamp with nut bolt eye hook suspension clamp pg clamp j hook dead end clamp gi0 warkhand wire danger board with nut bolt f clamp nut with bolt