tender for the work of new tf installation and augmentation of tf in bp 2025-26 on semi turn key basis under the jurisdiction of edc etah. - supply of material by the contractor as per relevant iss :- 2 stone pad (300x300x75 mm) 3 danger board with clamp and n&b 4 ms t/f base angle with clamp and n&b (75x75x6x2028 mm.) 5 holding clamp for top and dropper channel with nut & bolts 6 d.p. clamp 7 eye boult for gaurding angle 8 gaurding angle with clamp 9 lt incoming pennal with metering equipment fuse 10 al lug 400 sqmm 11 copper l- piece 62x225x12 mm 12 wti/oti for power tf 13 4 core lt mcb with box 14 safe carriage of following material from electricity store center etah to pit site of work from the kaccha & pakka road including loading & unloading at the respective ends including the cost of arrangement of labour, t&p etc. which required for poper completion of work (distance 0 to 60 kms.) 15 11 kv sf 6 3 way rmu unit 16 stp pole 11 mtr 17 11 kv vcb incoming/outgoing 18 33 kv vcb incoming/outgoing 19 control panel i relay 20 earthing complete 21 gi wire 6 swg 22 acsr weasel conductor 23 ms tee of channel with clamp 24 11 kv disk insulator with fitting 25 11 kv pin insulator with pin 26 stay set complete 27 concreting of stay 28 top chennal with clamp 29 droper chennal 30 lt xlpe cable al 1x120 sqmm for 100 kva 31 doble pole clamp 32 100 kva 11/0.4 kv t/f 33 11 kv tpmo 34 3 phase do fuse set 35 gi wire 10 swg 36 250 kva t/f 11/.04 kv, new 37 lt xlpe cable al 1x400 sqmm 38 lt pvc cable al 3.5x400 aqmm 39 battery set 12 nos x 2 volt , 200 ah 40 battery charger 24 volt 41 33 kv ct200/100/1-1a 42 lightining arester 33 kv 43 33 kv pt (33kv/110 v) 44 33 kv fuse set 45 line isolator 800 a, 33 kv 46 erection of material 47 erection of double support including complete h.t/l.t fittings etc. s.t. pole 11 mtr sp-55 including grouting & muffing of pole per dvvnl/respo norms. 48 installation of 11 kv tpmo with polymar insulator 49 erection of stay set complete including the work of nuzzling etc. 50 erection of earthing rod complete 51 laying sagging stringing, binding and jumpering acsr weasel conductor 52 laying & termination of lt xlpe cable al.1x400 sqmm. 53 laying & termination of lt xlpe cable al. 1x120 sqmm. 54 laying & termination of lt xlpe cable al.3.5x400 sqmm. 55 installation of 3-phase d.o. fuse set 56 installation of 4 core lt mcb with box 57 installation of danger board 58 making a plinth 2700x2000x1200 mm foundetion for rmu as per respo noms 59 fixing of gi wire 10 swg 60 installation of battery set 12 nos x 2 volt , 200 ah 61 installation ofbattery charger 24 volt 62 installation of 33 kv ct200/100/1-1a 63 installation oflightining arester 33 kv 64 installation of33 kv pt (33kv/110 v) 65 installation of 33 kv fuse set 66 installation of 11 kv vcb incoming/outgoing 67 installation of 33 kv vcb incoming/outgoing 68 installation of control panel i relay 69 fixing of wti/oti for power tf 70 power transformer water level netrul & body earthing complete as per respo norms 71 installation of line isolator 800 a, 33 kv 72 installation of 100 kvat/f 11/0.4 kv new at sitein all respect 73 installation of 250 kvat/f 11/0.4 kv new at sitein all respect 74 installation of lt incoming pennal with metering equpment 75 making a fancing for rmu as per respo noms 76 pipe & pipe earthingfor rmu as per respo noms 77 construction of 250 kva t/f plinth for size 2x2x1.5 m with the help of first class brick and masonry in the ratio 1:4 cement & sand coarse. filling the structure completely as per norms with rcc top 1:2:4 cement, sand coarse and stone grit with ms bar and ms channel for resting transformer wheel (100x50x6mm) and plaster. all material shall be provided by the contractor. 78 providing and erection of welded wire mesh fencing around transformer plinth with ms angle of size 40x40x6 mm length and 1.20 mtrs height. such panels shall be supported on ms angle from of size 40x40x6 mm having 04 nos corner supports of height 1.65 mtrs including extended legs for grouting which will be used as a door for entry of the personnel or removal/shifting of transformer with welded hinges, sliding belt etc for lockingarrangement as per drawing and specifications. the fencing will be painted in the green colour synthetic enamel paint after painting with one coat of red oxide primer. the rates should be inclusive of all materials required for completion of above work. (length of each fencing approx. 11 mtrs) with t& p labour etc. all material shall be provided by the contractor. 79 pipe earthingup to water level of 250 kva medium power transformers (body & nutral).all material shall be provided by the contractor. 80 received back material 81 11/0.4 kv 100 kva t/f old