tender for misc. civil work in s/qtr l-3a/101 budhi vihar, moradabad.; 1 demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of engineer - in - charge. 2 nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) 3 providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work up to plinth level : 4 1:2:4 (1 cement : 2 coarse sand(zone-iii) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) 5 cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete. 6 40 mm thick with 20 mm nominal size stone aggregate 7 providing and fixing glass strips in joints of terrazzo/ cement concrete floors. 8 40 mm wide and 4 mm thick. 9 providing and fixing on wall face unplasticised rigid pvc rain water pipes conforming to is : 13592 type a, including jointing with seal ring conforming to is : 5382, leaving 10 mm gap for thermal expansion, (i) single socketed pipes. 10 (i)single socketed pipes. 11 110 mm diameter 12 providing and fixing on wall face unplasticised - pvc moulded fittings/accessories for unplasticised rigid pvc rain water pipes conforming to is 13592 type a, including jointing with seal ring conforming to is : 5382, leaving 10 mm gap for thermal expansion. 13 bend 87.5° 14 110 mm bend 15 distempering with 1st quality acrylic distemper (ready mixed) having voc (volatile organic compound ) content less than 50 gram/ litre, of approved brand and of required shade and colour complete to give and even shade. 16 old work (one or more coats) 17 white washing with lime to give an even shade : 18 old work (one or more coats) . 19 painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : 20 one or more coats on old work. 21 finishing walls with water proofing cement paint of required shade : 22 old work (one or more coats @ 2.20 kg/10 sqm) complete. 23 renewing glass panes, with putty and nails wherever necessary including racking out the old putty: 24 float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm). 25 cleaning of terrace/loft water storage tank (inside surface area) upto 2000 litre capacity at all heights with coconut brushes, duster etc., removal of silt, rubbish from the tank and cleaning the tank with fresh water disinfecting with bleaching powder @ 0.5gm per litre capacity of tank, including marking the date of cleaning on the side of tank body with the help of stencil and paint and disposing of malba, all complete as per direction of engineer-in-charge. (the old date already written on tank should be removed with paint remover or black paint and if date is not written with the stencil or old date is not removed deduction will be made @ rs. 0.10 per litre if during cleaning any gi fittings or ball cock is damaged that is to be repaired by contractor at his own cost and nothing extra will be paid on this account) 26 dismantling w.c. pan of all sizes including disposal of dismantled materials i/c malba all complete as per directions of engineer-in- charge. 27 taking out existing wooden door shutter, repair by cutting, painting etc. and refixing of repaired door shutters to existing door frames, including replacement of hinges with screws, etc. as required, all complete as per the direction of the engineer-in-charge. 28 cleaning of drainage manholes and sewer lines by removing the deposited and other rubbish from the manholes and cleaning the sewer lines by rodding and flushing with water as directed by the engineer -in- charge. (rate per one manhole and sewer line to next manhole) 29 checking and making good all leakages etc. in gi,c.i,sci,ci pipes etc.complete as per the direction of the engineer-in-charge. (major fittings etc.to be paid separately). 30 repair of low level pvc cistern by p/f internal fittings whichever is required including testing and checking for proper working etc. all complete as per direction of engineer-in-charge. 31 providing and fixing white vitreous china water closet squatting pan (indian type) : 32 orissa pattern w.c. pan of size 580x440 mm 33 providing and fixing p.v.c. waste pipe for sink or wash basin including p.v.c. waste fittings complete. 34 flexible pipe 35 32 mm dia 36 providing and fixing chlorinated polyvinyl chloride (cpvc) pipes, having thermal stability for hot & cold water supply, including all cpvc plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. this includes jointing of pipes & fittings with one step cpvc solvent cement and testing of joints complete as per direction of engineer in charge. : internal work - exposed on wall 37 15 mm nominal outer dia. pipes. 38 20 mm nominal outer dia. pipes. 39 providing and fixing ptmt bib cock of approved quality and colour. 40 15mm nominal bore, 86 mm long. weighing not less than 88 gms. 41 providing and fixing unplasticised p.v.c. connection pipe with ptmt nuts, collar and bush of approved quality and colour. 42 15 mm nominal bore with 30 cm length. 43 opening of chocked g.i pipe line by gas pressure or machine pressure including all t & p complete as per direction of engineer- in -charge. 44 renewing fly proof galvanised m.s. wire gauge of existing wooden/steel door/windows using m.s.wire gauge with average width of aperture including wooden/ms flates, nails, screws or nuts and bolts including dismentling of existing wire mesh and shutter if required including credit of old unserviciable wire mesh etc. complete as per direction of engineer-in-charge.