tender for repair works of hostel furniture’s in boq basis at nift bengaluru, campus.; 1 providing and fixing nickel plated m.s. pipe curtain rods with nickel plated brackets : 25 mm dia (heavy type) 2 providing and fixing isi marked flush door shutters conforming to is : 2202 (part i) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 35 mm thick including isi marked stainless steel butt hinges with necessary screws. including removing of existing door shutter etc complete as per direction of e/i 3 providing and fixing aluminium handles, isi marked, anodised (anodic coating not less than grade ac 10 as per is : 1868) transparent or dyed to required colour or shade, with necessary screws etc. completesize of 125 mm 4 providing and fixing aluminium sliding door bolts, isi marked anodised (anodic coating not less than grade ac 10 as per is : 1868),transparent or dyed to required colour or shade, with nuts and crews etc. complete : (300x16) mm 5 providing and fixing aluminium tower bolts, isi marked, anodised (anodic coating not less than grade ac 10 as per is : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete of size (250x10) mm 6 providing and fixing aluminium hanging floor door stopper, isi marked,anodised (anodic coating not less than grade ac 10 as per is : 1868) transparent or dyed to required colour and shade, with necessary screwsetc. complete.twin rubber stopper 7 repairs of wooden/pvc flush door shutter from the carpenter by means of side sawing and tighten the hinges / replacing new hinges/pasting fevicoal to the exiting sheet any other repairs to the existing door shutter including cost of labour and other materials etc., complete. 8 providing and fixing table top up to 1.00 sqm. by using 18 mm thick commercial/block ply wood with 1mm thick lamination at top and bottom wood painting and around up to 20 mm x 20 mm thick beading if required including cost of all materials, fixtures, labour charges atc., complete as per directions. 9 labour charge for removing of toilet/washbasin old mirror and fixing of (480x600) mm mirror of superior glass (provided by nift) fixed with wooden cleats & c.p. brass screws and washers complete. 10 carefully removing of broken glass and replacing of new ventilator color glass including cost of new beadings, fixtures, labored charges and cost of materials etc complete as per direction of engineer in charge. size up to (100mmx600mmx3)mm 11 repairing work of aluminium door/window shutter removing of existing aluminium door shutter and separating the assembled door and repair the same and reassemble the door if required any new materials the same to be adopted and fit the frames to be fit extra screws/fasteners the shutter to be freely to come properly open and closing if required the rubber gasket to be changed etc., complete as per direction of engineer in charge. 12 carefully removing existing broken glass from aluminium door/windows & providing and fixingof new glass in glazed aluminium door/window/ventilator shutters and partitions etc. with epdm rubber / neoprene gasket etc. complete as per directions of engineer-in-charge.(with float glass panes of4.0 mm thickness) brocken glass to be shifted out of campus 13 providing and fixing of curtain rods in the existing almirah up to 15 to 20mm dia. made stainless steel including cost of materials and cost of labor etc. complete as per direction. up to 18inch to 36 long 14 providing and fixing of wooden/ready-made handle/chair back/ plank side stick to the existing chair and fixing by nut bolts up to size 60mmx50mmx400mm and polishing the same including cost of labour and materials etc., complete. 15 carefully removing existing almirah mirror and providing and fixing new mirror as per the sample including cost of transport, all material charges, and labour charges etc., complete as per the direction of engineer in charge. 16 minor repairs to existing almirah, cot, table like hook fitting, locking system repairing, bend removing, door shutter repairing, small touch up painting, handle tightening screw damaged locker round/long handle, main door handle replacing with new one tightening, cot nut bolt tightening, welding, drawer setup, nobe fixing, bushes fixing etc., complete including cost of labour materials etc., complete as per direction of engineer in charge 17 set of 2 almirah, set of 3 table, set of 3cot 18 set of 1 almirah or 2 almirah, set of 2 table, set of 2 cot 19 providing and painting one or more coat to wood/metalexisting chair by the enamel painting after the preparation of surface including cost of all materials and labor charges as per direction of eic. a) area up to 1.5 sqm. 20 providing and painting one or more coat to wood/metal existing student table by the enamel painting after the preparation of surface including cost of all materials and labor charges as per direction of eic. a) area up to 8 sqm. 21 providing and painting with enamel metal paint two coats where ever necessary brushing to give an even shade including applying red lead ready mix priming coat over existing steel or other metal surface with preparing the surface after thoroughly cleaning oil, grease dirt and other foreign matter and scoring with metal brushes, fine steel wool, sand papers including cost of materials, labour complete as per specification and as per the directions of engineer-in-charge. painting of old almirah area up to 15sqm. to 20sqm 22 providing and applying one or more coat synthetic enamel paint to the existing steel cot wherever require primer cost also including cost of all materials and labored charges etc., complete as per direction of engineer in charge. up to 5.0sqmtr area. 23 cleaning and removing of muck from the duct and duct chamber and disposing the same and cleaning by chemical and making good including cost of labour and material etc., complete as per direction of engineer in charge.