tender for providing additional 11 0.4kv 250kva sub-station at industrial area basal ts no-78 2025-26 wbs no- d-25-0351 bid no- ued 133/2025-26 under esd hpsebl basal.; 1 a) erection part 2 distribution transformer11/0.4 kv, 250 kva 3 providing and layingcement concrete 1:2:4 ( 1 cement : 2 sand : 4 graded stone aggregate 20mm nominal size) and curing complete including cost of form work and others material to used. size (2.00x2.00x1.10 mtr.)above ground level ) under ground deep 0.75 mtr) 4 surge arrester, 9 kv station class (porcelain type) 5 pipe earthing set 6 lt distribution panel box with mccb (400a, ,36ka,4p,1no.) &sfu(100a,4no., rewirable) (provided by hpsebl) 7 lt cable (3.5 core) 70 mm²x6 outgoing 8 lt cable (3.5 core) 400 mm²x2 incoming 9 prov. steel tublar 9 mtr longwith cap.(provided by hpsebl) 10 prov belt set angle iron (50x50x6) length 1800mm x2 nos. 11 prov.x-bracing set.ms angle iron (50x50x6 mm) length 2125 mm x2 nos. 12 prov.x-arm (horizontal) ms-channel iron (100x50x6mm) length 2340 mm x2 nos.( ∆) formation 13 for g.o. switch and d.o. fuse 14 ms channel iron (75x40x6 mm) length 2800 mm for holding the 11kv g.o.switch handle 15 g.o. switch handle supporting (channle iron 75x40x6 mm) length 460mm 16 prov.ms half clamp 17 erection part 18 erection of 250 kva s/stn. including 2 pole str for go switch and lt distribution bioxi.e. digging of pit for s/t pole and earthing, drilling of holes in x-arm, preparation of plate form str. member ci, alluminium paintai i.e x-arml, knee bracing set, erection of d-pole, ercetion of x-arm, drop out, fuse unit, linghting arrestor, mccb switch of lt box, energy meter, erection of t/f, and earthing conn. to t/f g.o switch lightning etc. erection of stay set, erection of jumper, pipe earthing 3 nos., erection of lt cable, brabed wire and painting, 3 nos. earthing to s/stn. by prov. 50kg salt charcole in each earthing i/c construction of trench for earthing as per rec board standard complete in all respect. 19 transportation charges including mannual carriage etc.