tender for annual plan-ptkd 2025-26 139/26-completion of mcf -general civil work-- 1 mcf 2 od186734/2025-2026:providing and fixing 200 mm wide square upvc rain water gutter including all necessary fittings and making all necessary connnections complete as per the direction of engineer in charge at site 3 od186738/2025-2026:providing and fixing pvc pipes includingjointing of pipes with one step pvc solvent cement and testing of joints complete as per direction of engineer-in-charge 110 mm dia 4 kfg/cm2 - external work (for downwater) 4 od186748/2025-2026:providing and fixing precoated galvanised iron profile sheets (size, shape and pitch ofcorrugation as approved by engineer-in-charge) 0.35 mm (+0.05%), total coatedthickness with zinc coating 120 grams per sqm as per is: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side. of the sheet and polyester top coat 15-18 microns.sheet should have protective guard film of 25 microns minimum to avoid scratchesduring transportation and should be supplied in single length upto 12 metre or as desiredby engineer-in-charge. the sheet shall be fixed using self drilling/self tapping screws ofsize (5.5x55mm) with epdm seal, complete upto any pitch in horizontal/ vertical orcurved surfaces, excluding the cost of purlins, rafters and trusses and including cutting tosize and shape wherever required. 5 50.10.2:steel work for purlin/single section with g i pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete 6 50.10.1:steel work in built up g i tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete 7 10.26.3:providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approves steel primer.g.i. pipes 8 8.31:providing and fixing ist quality ceramic glazed wall tiles conforming to is: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by engineer-in- charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. 9 od252973/2025-2026: 14.53.1. wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade: one or more coats on old work 10 od256033/2025-2026:14.54.1. painting with synthetic enamel paint of approved brand and manufacture of required colour to an give even shade: one or more coats on old work 11 11.49.2:providing and laying vitrified tiles in floor with different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to is : 15622, of approved brand & manufacturer, in all colours and shade, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to is : 15477, in average 6 mm thickness, including grouting of joints (payment for grouting of joints to be made separately).size of tiles 600x600 mm