tender for construction of dhalo mand for community use infront of mr. suryakant purso gawde house under ggsy in v.p navelim-- 1 earthwork in excavation by mechanical means (hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sq.m on plan) including disposal of excavated earth lead upto 50 m and lift upto 1.5m disposed earth to be leveled and neatly dressed including providing barricading, danger lighting guarding as directed in : 2 all kinds of soil 3 refilling the pipeline/foundation trenches plinth sides, foundation etc. with available excavated earth in layers not exceeding 20 cm depth consolidating each layer ramming and watering lead upto 50 m and all lifts and disposal of surplus earth as directed by engineer in charge. 4 supplying and filling in plinth under floors, trenches including watering ramming consolidating, dressing, complete. 5 moorum 6 rubble packing with hard laterite stone under floors including watering ramming and consolidating etc. in pipeline trenches and other foundations complete. 7 laterite masonry in neatly dressed stones of size as specified in cement mortar 1: 4 (1 cement : 4 coarse sand) in foundation and basement 8 laterite masonry in neatly dressed stones for 23 cms thick masonry walls in c.m. 1 : 4 (1 cement : 4 coarse sand in foundation upto plinth level 9 extra for laterite masonry in all sizes in superstructure from floor i level upto floor v level 10 providing & laying cement concrete 1:3:6 (1 cement: 3 coarse sand: 6 graded granitic or basaltic stone aggrt. 20 mm. nominal size) excluding cost of centering, shuttering and finishing in: 11 all works upto plinth level 12 providing and laying in position (1:11/2:3) reinforced cement conrete excluding the cost of centering, shuttering, finishing and reinfrocement (1 cement: 1½ coarse sand:3 graded stone agg 20mm nominal size) 13 all works upto plinth level 14 in beams, suspended floors, roofs having slope upto 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases upto floor five level 15 centering & shuttering including strutting, propping & removal of forms for : 16 foundations, footings, bases for columns 17 sides and soffits of beams, beam haunchings, cantilever, girders, bressumers and lintels plinth beams not exceeding 1m in depth 18 providing tmt steel reinforcement bars of (sail, tata. vizag, jsw steel ltd.) ) (confirming to is 1786 of 1986) for rcc work (conforming to i.s. 1786 of 1986) including bending, binding & placing in position in all the floors along with the factory made precast concrete cover blocks of specified sizes whose compressive strength is not less than that of surrounding concrete in the structural member. 19 providing & fixing flush door shutters decoration type core of block board construction with frame of first class hard wood and well matched first class indian teak ply veneering with vertical grains and cross bands and face veneers on both faces of shutters. 20 35mm thick including anodized aluminium butt hinges with necessary screws: 21 providing flat iron hold fast 40 cm including fixing to frame with 10 mm dia bolts, nuts and wooden plugs and embeded in cement concrete block 30 x 10 x 15 cm 1:3:6 mix (1 cement: 3 coarse sand: 6 stone aggregate 20 mm nominal size. 22 40 x 3 mm flat iron hold fast 40 cm long 23 providing and fixing m.s. grill of required pattern in wooden frames of windows etc. with m.s. flats square or round bars with round headed bolts and nuts or by by screws. 24 plain grill 25 providing & fixing chromium plated brass tower bolts (barrel type) with necessary screws complete. 26 250 x 10 mm 27 providing and fixing chromium plated brass handle with necessary screws etc. complete 28 125 mm 29 provided and fixing chromium plated brass 100- mm. rim latch and lock and a pair of knobs with necessary screws etc. complete (indian make of approved quality) 30 provided and fixing 150 mm chromium plated brass floor door stopper with rubber cushion screws etc. to suit shutters thickness complete. 31 providing and fixing anodized aluminium shutters in accordance with the specification annexed with goa schedule of rates (2004) vol & ii including all taxes, transportation, scaffolding and handling etc. complete as per direction of the engineer-in- charge: openable windows and ventilators using 18 mm series shutters section. 32 plain glass 33 steel work in built up tubular (round, square or rectangular hollow tubes etc.) (square hollow section (shs) is4923 /rectangular hollow section (rhs) is4923/ circular hollow section (chs) is1161 closed structural steel of (sail, tata. vizag, jsw ,apollo steel ltd.) make (min yeild stress 310 mpa)) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. 34 cuddappah stone slab machine cut flooring over 20mm (average) thickness of cement mortar 1:4 (1 cement : 4 coarse sand laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete - 25 mm thick. 35 providing and laying factory made shot blasted cement concrete interlocking paver block of minimum m35/m40 grade made by heavy duty block making machine with strong vibratory compaction and of aprpoved size and design / shape laid in 50 mm thick compacted bed of coarse sand, filling the joints with coarse sand, etc. all complete as per the direction of engineer.- in i, wave, rectangular, square etc. shapes. the products should comply to is 15658:2006 and manfucatured by iso9001: 2008 certified plant. the shot blasting should be done using 0.4-0.5mm dia steel shots with a speed of 3200 rpm. 36 60 mm thick in all colours except grey (m35 grade) 37 providing and and laying vitrified floor tiles in different sizes of johnson, somany, kajaria (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to is:15622 of approved make in colours and shades as specified laid on 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand) including grouting the joints with white cement and matching pigment etc., complete 38 600x 600 mm dark shades 39 providing and fixing granite stone slabs (flamed finish) 18mm thick in risers of steps, skirting, dado and pillars laid on cement paste and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete 40 jet black 41 providing and fixing colour coated galvulium roofing sheets of 0.5mm thickness including all the accessories (tata make) but excluding the cost of purlins, rafters, trusses, flashings etc. complete as per the directions of the engineer in charge. 42 add for providing & fixing flashings -[corners, ridges, valleys, gable end & trims] (girth upto 610mm) including all the accessories complete as per the directions of the engineer in charge. 43 providing and fixing prince or equivalent make pvc swr half round eaves gutter with bolts, nuts and flat iron brackets 40 x 3 mm size complete. 44 140 mm nominal size 45 12mm cement plaster 1:4 (1 cement : 4 fine sand) 46 18mm cement plaster in two coats under layer 12mm thick cement plaster 1:5 ( 1 cement : 5 coarse sand) and top layer 6mm thick with cement plaster 1: 3 (1 cement : 3 coarse sand) finished with sponge. 47 applying priming coat with ready mixed primer of approved brand and manufacture on steel work 48 painting two or more coats (excluding priming coat) with superior quality ready mixed paint for steel work of approved brand & manufacture in all shades on new work to give an even shade. 49 wall painting (two or more coats) with plastic emulsion paint of approved brand and manufacture on new work to give an even shade 50 painting three or more coats with acryllic exterior paint of approved brand and manufacture (such as dulex/ asian paints/ sherwin willians) including applying one coat of cement primer and one coat of surface treatment etc. complete 51 providing and applying white cement based putty of average thickness 1.00mm of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.