construction of road from bandhan to nagzari,tal- alibag - item no 1:- providing and constructing 75 mm. thick modifiedpenetration macadam (mpm) road surface including all materials, preparing the existing road surface, spreading 40 mm. stone metal layers 30% crusher broken metal + 70% hand broken (by breaking rubbleobtained by blasting) heating and spraying thebitumen of specified grade @ 2 kg/sqm, spreading 12 mm.size chips compacting with three wheel static roller having weight 8 to 10 mt. to achive the desired degree of compaction as per technical specification clause 506 etc. complete.including picking of existing wbm surface. (vg-30 bulk bitumen rates are considered to arrive at rates) 2 item no 2 :- providing and applying tack coat on the prepared surface heating by fames in boiler and spraying bitumen set footed in bitumen boller on b.t. surface 2.5 kg/10 sqm.(vg-30 bulk bitumen rates are considered to arrive at rates) 3 item no 3:- open graded premix surfacing- providing and laying ogc 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates premixed with bituminous binder transported to site with vts , laid over a previously prepared surface, finished to the required grade, level, alignment, and rolling to achieve the desired compaction but excluding prime / tack and seal coat. for bitumen of specified grade--using drum mix type hot mix plant with scada, paver and vibratory roller( over bt surface) (vg-30 bulk bitumen rates are considered to arrive at rates) with natural sand/v.s.i. quality artificial sand 4 item no 4 :- providing bituminous type a liquid seal coat on bituminous surface including supplying all materials and bitumen of specified gradepreparing existing road surface, heating and applying bitumen @ 0.98 kgsqm. by mechanical means, spreading chips and rolling, by static roller having weight 8 to 10 mt. etc. complete. (vg-30 bulk bitumen rates are considered to arrive at rates) 5 item no 5:- providing and fixing 90cmx60cm marble plate engraving 10cm .height letter,figures includingpainting the lefters/figures with approved colour and shade complete 6 item no 6:-quality control testing charges for aggrege ( water absorption, specific gravity, impact valuve crushing valuve etc. 7 item no 7- quality control testing charges bitumen ( penetration ,softening, point, flash & fire point, specific gravity etc. ) 8 item no 8reimbrsement of royalty charges if contractor provides orignal royalty challan from revenue department.