tender for estimate for bifurcation of 11 kv bedmau pump feeder of rannod d/c under onm dn. ii shivpuri.(236155) (nit-49) - wpb160x160mm,30.44 kg/meter h beam,13 mtr long 2 11 kv pin insulator polymer composit (5 kn) 3 11 kv strain hardware (t&c type) fittings 4 11 kv(45kn) composite polymer disc insulators 5 200 kg., 9 mtrs. long pcc pole 6 aaac raccoon conductor 0.075 sq. inch (80 sq.mm. al.eq.) 7 m s angle 65x65x6 mm 8 m s channel 100x50x6 mm 9 11 kv al 59 acs covered conductor 78.82 sq.mm along with mvcc accessories as per en:50397 calculated for 1 km single phase feeder, tension/dead/anchoring clamps with piercing connector suitable for mvcc, ipc for cc to cc connection,en-50397 -p-2 10 aluminium paint 11 anti climbing devices ( barbed wire 2.24 mm dia, 14 swg) 12 back clamp for 280 kg pcc pole of ms flat 65x8mm.(each weight 1.92 kg) 13 back clamps for h-beam of ms flat 65x8mm (each weight 1.92 kg) 14 back filling of poles with boulders. 15 clamp 65x8 mm flat of ms flat for h-beam ( each weight 3.2 kg) 16 clamp 65x8 mm of ms flat for pcc pole 280kg. (each weight 3.04 kg ) 17 concreting of stay (16 mm / 12 mm) @ 0.2 cmt. per stay 18 concreting of stay (20 mm / 25 mm) @ 0.3 cmt. per stay 19 concreting of structures & foundation (1:3:6) 20 danger boards enamelled 11 kv 21 earthing coil of 115 turns of 50 mm.dia and 2.5 mtr. lead of 4.0 mm g.i wire 22 earthing for pcc pole 4.00 mm-8 swg g.i wire- 0.8 kg, per pole 23 g.i. wires 4.0 mm. (8 swg) 24 guarding for line/ road crossing with 6 swg gi wire & lacing of 8 swg gi wire 25 m.s.angle 50x50x6 mm 26 m.s.nuts with bolts 27 red oxide paint 28 spiral winding sleeve suitable for covered conductor 29 stay gi wire 7/4.00 mm.(7/8 swg) 30 stay insulators 90x65mm 31 stay set 20 mm. complete without stay wire (painted) 32 stay set complete without stay wire 16 mm. (painted) 33 stay wire 7/3.15 mm.(7/10 swg) 34 stone block/pre cast block for base pedding(450x450x75mm) 35 lebour charge for compny side material