tender for open gymnasium at kavalangad gp vaariyath chirayil supply and installation of open gymnasium equipments at kavalangad gp vaariyath chirayil , open gymnesium equipments in kavalangad gp vaariyath chirayil , air walkersingle(air walker made from “c” class gi pipe(is 1239(part1):2004) . closing caps are made up of low linear density poly-ethylene (lldpe) material with injection moulding. the powder coat should be poly urethane & epoxy powder with 60 to 70micron thickness. dimensions: - 1800mm (length) x 600mm (width) x 1550mm (height) ) , situp board double(sit up board made from “c” class gi pipe to be use by two persons at one time. closing caps are made up of low linear density poly-ethylene (lldpe) material with injection moulding. the powder coat should be poly urethane & epoxy powder with 60 to 70micron thickness. dimensions: - 2000mm (length) x 1100mm (width) x 650mm (height). , double twister /twister 2 in 1(double twister made from “c” class gi pipe (is 1239(part1) :2004)to be used by two persons at one time. double twister (dimensions: - 850mm (length) x 660mm (width) x 1100mm. (height). safe area: - 3 mtr x 1mtr. the m.s. round plate is welded at bottom. the twister plate fitted on the standing frame is made up of m.s. round plate. closing caps made from top quality fiber reinforced plastic material. the bearings used are of “6205zz” permanent lubricated sealed bearing of reputed brand. the powder coat should be poly urethane & epoxy powder with 60 to 70micron thickness. , sky walker(user weight 120 kg,length 1800 millimeterwidth 600millimeterheight1550 millimeter, made from “c” class gi pipe(is 1239(part1):2004). the powder coat is done by poly urethane & epoxy powder with 60 to 70micron thickness. closing caps are made up of low linear density poly-ethylene (lldpe) material with injection moulding. ) , hip flexore( hip flexore made from “c” class gi pipe(is 1239(part1) :2004)to be used by two persons at one time. closing caps are made up of low linear density poly-ethylene (lldpe) material with injection moulding. the powder coat is done by poly urethane & epoxy powder with 60 to 70micron thickness.dimensions: - 1290mm (length) x 1065mm (width) x 650mm (height). , weight lift with bench(weight lift made from “c” class gi pipe(is 1239(part1) :2004)to be use by two persons at one time. closing caps are made up of low linear density poly-ethylene (lldpe) material with injection moulding. the powder coat should be poly urethane & epoxy powder with 60 to 70micron thickness.dimensions: - 1200mm (length) x 1200mm (width) x 1750mm (height). bench with fixed weight lift ecquipment made up ofc class gi pipe.) , shoulder builder two wheel(shoulder builder made from “c” class g.i pipe(is 1239(part1).closing caps are made up of low linear density poly-ethylene (lldpe) material with injection moulding. the powder coat should be poly urethane & epoxy powder with 60 to 70micron thicknessdimension 900mmlx900mmwx1580mmh.) , fully body twister(fully body twister“c” class g.i pipe(is 1239(part1):2004).closing caps are made up of low linear density poly-ethylene (lldpe) material with injection moulding. the powder coat should be poly urethane & epoxy powder with 60 to 70micron thickness.product dimensions:1800 mmlx540mmwx1430mmh) , surf board(surf board made from “c” class gi pipe (is 1239(part1):2004to be used by two persons at one time. closing caps are made up of low linear density poly-ethylene (lldpe) material with injection moulding. the powder coat should be poly urethane & epoxy powder with 60 to 70micron thickness. product dimension 1200mmlx450mmwx950mmh. , leg press &push up board(leg press is made from “c” class gi-pipe(is 1239(part1):2004) the pins used are made up of solid bar. the bearings used are of “6205 permanent lubricated sealed bearing of reputed make. the nut bolts used for assembly are made from ss material.high tensile steel with galvanized nuts & bolts are used for assembling. the powder coating should be poly rethane& epoxy powder with 60 to 70 micron thickness.product dimensions :1700mmlx380mmwx1550mmh. , horse rider(leg press is made from “c” class gi-pipe(is 1239(part1):2004) the pins used are made up of solid bar. the bearings used are of “6205 permanent lubricated sealed bearing of reputed make. the nut bolts used for assembly are made from ss material.high tensile steel with galvanized nuts & bolts are used for assembling. the powder coating should be poly rethane& epoxy powder with 60 to 70 micron thickness.product dimensions :1700mmlx380mmwx1550mmh.