supply, installation, testing and commissioning of electro-mechanical equipments at water supply scheme zantrag under jjm.-2 supply, installation, testing & commissioning of submersible pumping unitas per is 8034 with following specification are as under :pump : speed= 2900 rpmtype of pump = mixed flow.type of fluid to be handled=clear watermotor:-method ofstarting = star – deltaspeed = 3000 ( sync ) .frequency= 50 ± 3 % hz working voltage= 380-415 ± 15% v, 03 phaseefficiency = not less than 90%note: providing of test certificate & characteristic curve of pumping equipment is compulsory and pumping unit is to be approved from the concerned sub divisional office before procuring. the mainspecicifications of pumping unit are:motor rating: 25hpdetailed specifications as per cluase 1 sbd 3 supply, installation, testing & commissioning of submersible pumping unitas per is 8034 with following specification are as under :pump : speed= 2900 rpmtype of pump = mixed flow.type of fluid to be handled=clear watermotor:-method ofstarting = star – deltaspeed = 3000 ( sync ) .frequency= 50 ± 3 % hz working voltage= 380-415 ± 15% v, 03 phaseefficiency = not less than 90%note: providing of test certificate & characteristic curve of pumping equipment is compulsory and pumping unit is to be approved from the concerned sub divisional office before procuring. the mainspecicifications of pumping unit are:motor rating: 10hpdetailed specifications as per cluase 1 sbd 4 sitc of submersible motor starter: mu-g 50fully automatic submersible motor starters. rating = 30 hp power specs =3 ?, 415 + 15% v, 50 + 3 % hz.relay range= 30-50 a.protection = under voltage / over voltage relays with minor wiring etc 5 sitc of submersible motor starter: mu-g 20fully automatic submersible motor starters. rating = 30 hp power specs =3 ?, 415 + 15% v, 50 + 3 % hz.relay range= 13-21 a.protection = under voltage / over voltage relays with minor wiring etc 6 providing and fitting of 3-core flatsubmersible copper cable conforming to is: 694 ( part 1st ) – 1964 & is: 694 ( part 2nd ) - 1964 for submersible pumping unit and other electrical equipments . the cable connections terminal shall be fitted with copper thimbles of required size. size: 10sq.mm 7 providing and installation of 200amp capacity, 4 pole, 36 ka breaking capacity mccb with thermal magnetic release.