repairs and replacement of parts to the truck jk06 3418- 1 repairs to the alternator of the truck by way of its dismantling, extraction of damaged / worn-out parts, washing / cleaning with petrol / waste cloth, repairing the alternator assy. by p / f new armature, carbon brush set, shaft bush set, link set and spring set. complete job including cost of material and labour charges. the quoted / uploaded rates of items / job should be after the deduction of cost on account of old parts / old material / lubricants. 2 repairs to the truck by way of dismantling its suspension assys. – 4nos. ( f & r ) , extraction of damaged / worn-out parts, repairing by p / f new spares such as leaf springs – 2nos., centre bolts – 4nos., u-clamps – 2nos., leaf pins with bushes, hangers – 2nos., re-tensioning of the leaf assemblies, refitting to the truck & greasing. also repairs to the propeller shaft of the vehicle by way of p / f of u.j. cross assy. – 01no., cross holders – 02nos., centre brg. with rubber coupling ( big and small ) . complete job including cost of material and labour charges.the quoted / uploaded rates of items / job should be after the deduction of cost on account of old parts / old material / lubricants. 3 compete washing of the vehicle at service station by using washing powder and k. oil for removal of grease and oil strains, painting of the body show, cabin and chassis outside and inside with one coat of metallic primer. filling of body with body shoulder for smooth surface and then finishing with fine sand paper for painting, then applying two coats of recommended blue paints including letter writing. complete job including cost of material and labour charges. 4 p.o.l required for journey of vehicle from divisional office to workshop and back to khellani after repairs. complete job.. 5 repairs to the body and electrical system of the vehicle by way of dismantling thye worn out parts and p / f of new wind shield: 2 no. along with rubber beads.complete job including cost of material and labour charges the quoted / uploaded rates of items / job should be after the deduction of cost on account of old parts / old material / lubricants.