tender for 1.5m radious stone pedstral 7 height of the pedstral is 0.45m. , create the original model avvaiyar statue sculptors start with a model made from clay, wax, plaster, annual repair resin to define the statues form.this model captures fine details and serves as the basis for replication. , make the mold a two-part mold is formed around the model using elastomer or silicone rubber for flexibility. the mold is then brushed with molten wax to build a wax shell matching the desired bronze thickness , build wax assembly wax tubes (sprues and vents) are attached to the wax shell for pouring metal and releasing gases. a heat-resistant core fills the interior if hollow casting is needed, secured with metal pins. , invest and burnout the wax assembly is coated in layers of heat-resistant plaster or investment material. its heated in an oven to melt and drain the wax (lost wax), leaving a hollow mold. , pour and cool molten bronze, heated to around 1200°c or 2150°f, is poured into the mold through sprues. after cooling, the plaster is broken away to reveal the rough bronze casting. , finish the sculpture excess material like sprues is cut off, pieces are welded if multi-part, and the surface is chased, polished, and patinated for color and protection. this matches your prior interest in bronze statue creation , add gst 18%