providing and fitting of pumping equipments at water supply scheme chandgam wasoora.-supply, installation, testing and commissioning of horizontalpumping unit as per is 1520 with following specification:- pump:- 1.type :-horizontal split casing / multistage2. discharge:- 8000 gph3. dynamic head :- 60 mtrs4. type of fluid to be pumped:- river watermaterial of construction1.impeller:- stainless steel 2.shaft:-ss410 3.pump casing:- cast iron the pump shall confirm to is-1520 codemotor :- 30 hpa ) type :- horizontal squirrel cage induction type b ) no of phases: 3 phase415 v+10%, 50 hz, ac supply c ) winding:-copper wound squirrel cage d ) type of enclosure:-spdp / tefc e ) method of cooling:- air cooled with fan mountedf ) method of starting: star deltag ) speed 1440-1450 rpmh ) capacity :-30 hp or above the pump-motor should be mounted on a common base frame fabricated out of m.s channel of suitable size and duly fitted with t- type foundation bolts / nuts and washers to make the pumping unit vibration free. the pump and motor should be coupled through suitable coupling. the coupling faces checked for both angular and axial alignment with the help of tapered gauges / feeler gauges or dial indicator.job includes testing and commissioning of pumping unit on full load at site. note: test certificate having the serial no. of the pumping unit along with the performance curve in duplicate from the manufacturer must be produced on delivery of the item and pumping unit is to be approved from the concerned sub divisional office before procuring.