tender for work under system augmentation plan in sub division rs ghat under ee, edd, rs ghat, barabanki- 1 safe loading carriage including unloading and proper stacking of following materials from central store barabanki / je store to site of work. 2 pcc pole8.5 mtr long 3 11kv pin insulator . 4 11kv disc insulator . 5 ms earthing rod 6 transformer 25 kva 7 transformer 100 kva 8 transformer 250 kva 9 transformer 400 kva 10 abc cable 3x50 sq. mm. 11 acsr weasal conductor 12 stay set complete 13 other line material 14 top channel 11 kv 15 dropper channel 11 kv 16 t-off channel 11 kv 17 sub-station base angle 18 dragging of pcc pole from je dump store to site 19 erection of stay set of 16x1800 mm rod duly painted with red oxide, anchor plate, thumble turn buckle andstay insulate etc. digging of pit of size of size 0.4x0.6x1.6 m for grouting 1:3:6 cement concrete, with stay of size 7 / 8 swg, nuzzling & grouting. 20 stringing and sagging of 11 kv line with acsr weasal conductor including nuzzling binding and jumpering ( weasal conductor will be provided by the department ) 21 installation / mounting of following transformershaving different capacities cited below, including its connection of 11 kv and lt line joints, fixing of copper l-pieces, provinding crimpingaluminium lugs with the help of criping tools of required size. all the materiasl in above work will be provided by the contractor at his own cost. only transformer lt cable and acsr conductor requird will be priovided by the deprtment. 22 mounting of 25 kva tranformer 23 mountingof 100 kva tranformer 24 mountingof250 kva tranformer 25 mountingof400 kva tranformer 26 errectionof substation type double pole with pcc pole 8.5 mtr. long including mounting of top channal dropper channel, base angle with clamps with nut & bolt 33 / 11 kv line including grouting of support and plinthing 300 mm above ground level, fitting of 33 / 11 kv pin & pin insulator. 1 / 6 of total lenght of poles will remain under the ground and planted on stone pad of size 300x300x75 mm. 27 stringing and sagging of lt 3x50 abc cable ( lt abc cable will be provided by the department ) 28 earthing of pole with ms earthing. 29 provinding & fixing of various type materials. all materials shall be supplied by the contractor. 30 nut & bolt 31 clamp for top / dropper and t-off channel etc. 32 lt clamp. 33 shakle insulator 34 stay insulator 35 concreating and pilinthing ofpccpole 18x24 cm. 36 fabricatation of all steel items received from departmental store in all respects with the view of mounting of top channel / dropper / t-off channel, sub station base angle etc. 37 dismentaling of 11 / 33 kv line & carriage site to store 38 dismentaling of 10 kva t / f & carriage site to store 39 dismentaling of 16 kva t / f & carriage site to store 40 dismentaling of 63 kva t / f & carriage site to store 41 dismentaling of 100 kva t / f & carriage site to store 42 dismentaling of 250 kva t / f & carriage site to store 43 constructions of masonary type t / f plinth of size 2x2x1.5 m with cement coarse sand, sand and brick ballast, filling of sand in the hollow space plastering outer surface in ratio 1:4:6 top of the plinth 4” thickness grouting of 2 no. ms channel of size 100x50x2000 mm on the top of the plinth for placement of t / f. all the material will be provided by the contractor. ( vide p-11 of resspo cost schedule 2018-19 ) 44 fabrication & erection of wire mesh rectangle type fencing of size 5 mtr x 3 mtr having height of 2.0 mtr around the transformer with locking arrangement made of ms angle iron of 50x50x6 mm jointed with nuts and bolts. the flat of size 50x6 mm and wire mesh of size 10 swg will be used. ms angle pillers will br grouted in size 350x350x1200 mm inthe ratio of 1:4:6. required painting wil be done as per norms.all the materials will be provided by the contractor at his own cost.