work of purchasing material for redressal of electricity related complaints , supply 5.5 mtr aluminium ladder , providing & fixing of 240/415 v ac mcb with positive isolation of breaking capacity not less than 10 ka (b/ c tripping characteristic as per type of load and site requirement) 4kv impulse withstand voltage, as per pwd specification for electrical works with isi marked is 8828(1996) / conforming to iec 60898-1 2002, iec 60947-2, low watt losses, trip free mechanisum , energy limiting of class 3 as per iec, minimum phase termination capacity of 35sq.mm. , conductorline load reversibility, label holding facility , ip 20 contact protection and fitted with existing distribution board/sheets, min. operation 20,000 upto 32 a rating and 10,000 upto 63 a, 5000 for 80 a rating including making connections, testing etc. as required. . oem shall have submit nabl / cpri / erda accrediated lab test reports before execution & all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure a attached with this bsr . e060110 single pole mcb e060115 50/63 a rating , e110200 providing & laying p.v.c. / xlpe insulated & p.v.c. sheathed unarmoured / armoured copper cable of 1.1 kv grade as per pwd specification for electrical works in existing rcc / hume / stoneware / pvc pipe/ open duct/cable trench with filling of excavated earth in trench , on existing cable trays or on surface etc. including making necessary connection, testing etc. as required of size and as per points (a), (b), (c), mentioned below:- (a) copper conductor of electrlytic grade copper, purity >99.97 % isi marked as per is:1554 p-i / is :7098 p - i (b) conductor shall made of copper rods confirming to is 613-1964, is 3975-1999 for armouring of cables in armoured cable items , is 5831 for sheath, is 10810 (part 0 to 64 ) for testing procedures (c) oem must have iso 9001 & 14001 certifications & its own in house nabl lab setup for all testing facilities for cables . appropriate type test certificate / oem test report shall be submitted . all above as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure a attached with this bsr . e110210 un-armoured e110216 16.0 sq. mme110216a 1 core , e100200 providing & fixing of iso certified company made tp&n 415 v ac23a front handle operated switch disconnector fuse unit, cubical type, with metallic enclosure, as per pwd specification for electrical works conforming to is/lec 60947-3 : 1999 with hbc fuses including making connections with lugs, testing etc as required. appropriate type test certificate / oem test report shall be submitted . all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure a attached with this bsr . e100204 200 a rating