additional business plan work in the area of edsd deoband iind under edd deoband-2 safely cartage ofpcc pole 8.5 mtr. long from esc, sre to the site of work including loading unloading at both ends. (dist. up to 40 km.) 3 erection of single support on pcc pole 8.5 mtrlong with complete fitting of all accessories of11 kv line as per respo specification 4 safely carriage of line material (except pcc pole)esc sre to site of works through privet vehicle including loading and unloading at both ends. (distance 0 to 25 k.m.) 5 removal of 63 kva t/f from the existing d/p after opening ht & lt connection and with shifting the t/f from the site to esc, sre/je store with loading & unloading at both ends. 6 safe cartage of 100 kva t/f from esc,sre to site of work including loading & unloading at both ends. (dist. upto 40 km.) 7 safe installation of 100 kva t/f on the d/p with complete fittings including making connections and commissioning. 8 removal of 100 kva t/f from the existing d/p after opening ht & lt connection and with shifting the t/f from the site to esc, sre/je store with loading & unloading at both ends. 9 safe cartage of 250 kva t/f from esc,sre, to the site of work including loading & unloading at both ends. (dist. upto 40 km.) 10 constriction of plinth for installation of 250 kv t/f of size 1.5x1.5x1.5 mtr made of 9”inch thick wall in all four sides with 6”inch thick rcc top duly filled with sand and plastered 12mm thick in ratio 1:4 with cement and sand on outer surface of brick wall. 11 safe installation of 250 kva t/f on the plinth with complete fittings including making connections and commissioning. 12 fencing of 250 kva transformer as per respo specification. 13 pipe earting of 250 kva t/f by boring of 60 feet deep and fixing of 60 feet g.i. pipe 1/5 dia (zindal class b) and connecting with 06 no. copper wire with toe made of copper at bottom of g.l/ pipe t/f providing of required charcoal and salt in pipe. 14 laying, lifting, stringing, sagging jump ring & binding of acsr weasel conductor for ht/lt line. 15 laying, lifting, stringing, sagging jump ring & binding of acsr rebbit conductor for ht/lt line. 16 providing and fixing of aluminum bolted type lug 17 laying, lifting, stringing, proper sagging abc cable of size 3x120/3x95 sq.mm. including fixing of all type clamps and connector providing all accessories. 18 removal of acsr weasl conductor from site of work to je store/esc sre including loading and unloading at both ends. 19 safely removal of 11 kv incoming vcb & outgoing vcb from site of work to esc sre through private vehicle including loading and unloading at both ends. 20 carriage of 11 kv incoming vcb & outgoing vcb from esc sre to site of work through private vehicle including loading and unloading at both ends. 21 safely installation of 11 kv incoming vcb & outgoing vcb and making connection properly. 22 fixing of 11 kv stay rods by digging of pits in block of 600x600x300 mm. &with new brick and nozzling of stay wire 7/10 swg and fitting the same on the pole 23 laying of lt pvc cable 3x1.50 sq. mm as per respo specification.