procurement of lab equipments for setting up qc lab at thalai kannur , lab equipments , od1662 / 2021_2022 : supplyingand installation of compression testing machine-2000<br>kn-electric operatedwith digital display -makehydraulicdouble pump systemcompression testing machines conform to the requirements of is : 516 and<br>other international standards like bs and astm. detailed specification as confirming to is 14858-<br>2000 with bis certification.• capacity : 2000 kn<br>• least count : 0.1 kn<br>• type of pumping : motoroperated<br>• • password protected calibration : yes<br>• auto calculation of the result : yes in n / mm2 ( mpa ) <br>• ram dia : 205 mm<br>• piston stroke : 50 mm<br>• operation : 220 volt three phase<br>• easy to operatethe machine should be calibrated and verified in the presence of officers.<br>the rate including warranty and service of free of cost for a minimum period of 2 years and free<br>calibration of machine for a maximum of 5 times for a period of minimum 2 years for all costs, <br>conveyance, etc , od2323 / 2022_2023 : od5201 / 2019_2020 :od5714 / 2018_2019 :supplying testing and commissioning of cube moulds conforming to is: 4031, 516, is:<br>10082 & 10086 available in different sizes and made according to indian standards. for metric size cube<br>moulds, the faces are machined flat to +, - 0.02mm accuracy and finished to within 0.2mm. for inch size<br>moulds, the faces are machined to +, - 0.01” and finished to within 0.01”. supplied complete with base plate.<br>size: a ) . 15cm x 15c, m x 15cm with isi stamp ( 13.5kg ) etc complete