increasing load capacity of overloaded transformer, replacement of vcb, jarjar wire and construction of line under scheme nagar nikay, edd-milak, rampur ( semi trunkey basis ) . , carriage of the following material from store centre, rampur to work site including loading & unloading. , 11 kv vcb o / g feeder ctr 200 / 100 / 5a , lt pvc cable 3.5*70 sq mm , ab cable ( 3*120+1*95+1*16 ) mm sq , acsr weasal conductor , acsr rabbit conductorconductor , old scrap vcb ( from site to store ) , old scrap wire ( from site to store ) , cartage of healty transformer from store to site, dismantling of ht & lt connection & replace offollwoing capacity t / f from substation double poles ( including connection ) andloading and unloading with associated work at both ends within 70 kms. , increasing load capacity of overloaded tf by separate 63 kva trasnformer , a ) single support excavation of foundation pit in size of 75x45cm having depth of 1 / 6th of the full length of the support ( pole ) , providing and laying of stone pad ( 300x300x75 mm ) in the bottom of the pit. erection of support ( pole ) complete with fixing of 11 kv v-type cross-arms and other accessories by providing clamps made of ms flat of size 65x65xc6 mm with nuts & bolts, as per respo norms. , 11 mtr long st pole. , 8.5 mtr pcc pole long , grouting of support in cc 1:4:8 ( cement, sand & 40 mm. brick ballast ) grouting will be done in the block of size 45x45cmx1 / 6th of full length of the support upto ground level, 30 cm plinth above the ground level with cc 1:3:6 ( cement, course sand and stone grit ) with muffing. the work includes back filling and proper ramming etc. a ) single support , 11 mtr long st pole. , 8.5 mtr pcc pole long , grouting of stay rods ( 20x1800 ) mm including all work of excavation, cement concrete in size of ( 0.60x0.60x0.30 ) m in the ratio of 1:4:8 ( cement, sand, 40mm brick ballast ) including back filling of soil and proper ramming etc. , fixing, tightening and nozelling of stay wire with stay rod with the pole of required tension by providing stay clamps. , earthing of support with ms earth rod of ( 20x2500 ) mm long including excavation of pit and driving ms rod 3.0 m apart from support and 0.5 m below the ground level and connecting below the earth electrodes with the help of gi wire no. 8swg and earthing lugs , providing & fixing of 11 kv pin insulator with pin , providing & fixingof 11 kv disc insulator , laying, stringing and binding of ab cable ( 3*120+1*95+1*16 ) mm sq as per respo norms and as per direction of supervising engineer. , laying, stringing and binding of lt pvc cable 3.5*70 sq mm as per respo norms and as per direction of supervising engineer. , laying, stringing and binding of acsr weasal conductor as per respo norms and as per direction of supervising engineer. , dismentaling old line and laying, stringing and binding of acsr rabbit conductor as per respo norms and as per direction of supervising engineer. , dismentaling of old vcb and installing new 11 kv vcb o / g feeder ctr 200 / 100 / 5awith fitting by providing ofbolt and nuts as per respo norms and as per direction of supervising engineer. , installing distribution box three phase with fitting by providing ofbolt and nuts as per respo norms and as per direction of supervising engineer. , gaurding of 11 kv ht line as per respo norms and as per direction of supervising engineer. , providing and fixing danger board with clamps , providing and fixing j hook , providing and fixing piareing clamp , providing and fixing suspention clamp , providing and fixing dead end clamp , providing and fixing stone pad , providing and fixing barbed wire , providing and fixing f bracket with nut bolt , providing pcc pole 8.5 mtr. long. , providing st pole 11 mtr. long. , providing x-arms. , providing distribution box , providing droper channel 100x50 , providing top channel 125x65 , providing ms angle 75x75 , providing guarding angle , providing gi wire , providing stay complete , providing earthing complete , providing and fixing clamp with nuts & bolts for holding x-arm , providing and fixing nut bolt with clamp